Table Insert 199037
Part Number: 199037
Order within the next 13 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: JBS14-37.
Product Information
Description:
This is a genuine OEM replacement table Insert used on Jet band saws. Table Saw Inserts reduce splintering and chip-out on the cuts. It also prevents thin slices of wood from jamming in between the blade and the plate during a cut. If an insert is missing or damaged it needs to be replaced. This part is made out of metal and it is sold individually. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 8 compatible machines
Products Compatibility
This item works with the following types of products:
- • Band Saw
- • Saw
Repair Guides
Articles:
Step-by-step instructions for removing and installing the table insert on your Jet band saw....
September 12, 2017
|
Questions & Answers for Table Insert
Will it fit jet 18 inch bandsaw?
Dennis
for model number Jwbs18
asked on 2023-03-10
Hi Dennis,
Thank you for your question. The part number listed under your model number for the table insert is JWBS20-144. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
eReplacementParts Team March 10, 2023
Repair Instructions: Submitted by Customers Like You
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None!
Table insert was split - after I cut into it!
Replacement insert fit my saw with just minor filing of shsto edges.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Did not require tools.
Table Insert worn.
Replaced. Took about 10 seconds. Simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Unit had broken or worn parts
Removed parts and replaced parts. Parts were genuine Jet band saw parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none needed
Just needed a new insert
Just put the insert into the table
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
table broke off saw when saw fell out of the back of my pickup truck.
Removed the broken trunnions from the table and replaced them. Replaced the clamp shoes also. Reinstalled the table and adjusted to to perpendicular to the saw blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Bracket holding the lower guide bearing came loose
Remove table,removed blade, removed tires, replaced bearings and added bushing and larger washers to hold lower bracket in place. install new tires top & down, installed new blade, realigned bearing guides, blade on the tires, reinstall table, back to work
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Insert worn
Installed insert into the table
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Hammer
Lost table insert and bad tire.
Cleaned insert location and lightly tapped table insert into place with hammer after removing blade.
Tire required using hand force to slide it into place on the upper saw wheel.
Tire required using hand force to slide it into place on the upper saw wheel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
The table support and adjusters were broken.
1. Removed the table off the saw.
2. Removed the broken parts.
3. Replace them with the new ones.
Thanks, if I need more parts in the future I will be order from you agains!
2. Removed the broken parts.
3. Replace them with the new ones.
Thanks, if I need more parts in the future I will be order from you agains!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The original part fell apart due to age.
I have an older Jet 14 inch bandsaw and the newer part replacement fit PERFICTLY!
The staff was very helpful when I was asking if the part would fit....It did!
I will be using then again when I need other parts.
Thanks
The staff was very helpful when I was asking if the part would fit....It did!
I will be using then again when I need other parts.
Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
7 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
happy
Parts fi. delivered quickly reasonable price
Guest -
May 24, 2023
Verified Purchase
Easy order
It was easy to order and got here fast
Guest -
March 12, 2022
Verified Purchase
Easy repair
Easy repair, part fit perfect.
Anonymous -
December 21, 2021
Verified Purchase
Easy repair.
Part arrived quickly and fit perfectly.
Guest -
September 7, 2021
Verified Purchase
Perfect Match
The table insert for my band saw was an exact replacement for the one lost during our recent move.
James -
June 25, 2020
Verified Purchase
As expected
Wuick service, right part
Guest -
May 5, 2019
Verified Purchase
worked as expected
Guest -
August 25, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
Repair Guides
Articles:
Step-by-step instructions for removing and installing the table insert on your Jet band saw....
September 12, 2017
|