Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
roller bearing guides
bearings were for the blade guide on my 12" jet band saw. was quick...quicker and easier then I planned. it was the 1st time since I bought the saw that I replaced the bearings. should have done this much sooner as the saw now runs much smoother and much more quieter.
Guest - August 12, 2020
Verified Purchase
★★★★★
★★★★★
Excellent service!
Correct part, fast delivery, and my bandsaw is up and running smoothly!
Guest - May 18, 2021
Verified Purchase
★★★★★
★★★★★
Part ordered was the part received. Prompt delivery by USPS.
Part ordered was the part received in a prompt manner.
Guest - May 22, 2021
Verified Purchase
★★★★★
★★★★★
Great part easy replacement.
Came early east to replace.
Guest - May 13, 2022
Verified Purchase
★★★★★
★★★★★
Correct part
This bearing was the correct part and worked as planned it looks and feels just like the factory ones
Jason - December 13, 2022
Verified Purchase
★★★★★
★★★★★
Jet band saw replacement part.
The Jet Band Saw parts fit perfectly and were delivered quickly. I will use this company again
Guest - September 12, 2023
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(7 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The lower blade guide bearings siezed up on my Jet JWBS-14SAF-3 band saw
I had to remove a knurled knob to get the old bearings off. . The parts department at Jet told me the knob was pressed on, it wasn\'t. The technical support department told me it was threaded on, and that it had thread lock on the threads. I drilled a hole in a block of wood about the same size diameter of the shaft I had to hold. Then I
... Read morecut the block in half (along the length of the hole) so that I could wrap sandpaper around the shaft and put it in the block and then in the bench vice. That gave me a good grip on the shaft so it wouldn\'t spin. Then I used vice grip pliers to remove the knurled knob. Once the knob was off I pried the old bearings off using a screwdriver and pliers. I heated the new bearings just a little so that they slid on the shaft easily. To heat the bearings I just slid them (one at a time) over my soldering iron shaft for a few seconds. Then I re-assembled everything.
I removed the old guide blocks from the brackets. And put a dollar bill between them and the blade for the correct placement. I then remove the old bearings and placed the new ones in and adjusted them so the blade was just almost touching them.
Did you find this story helpful?
Thank you for voting!
Older Metal Band saw had some wore out parts, New replacement saw was $1600. Fix the old one for a couple hundred.
Removed panhead screw and roller bearing and re-installed the new ones...got the parts from E-Replacement parts in a very short time from ordering and got back up and running in a very short time...VERY PLEASED...!!!!!!
Did you find this story helpful?
Thank you for voting!
Bracket holding the lower guide bearing came loose
Remove table,removed blade, removed tires, replaced bearings and added bushing and larger washers to hold lower bracket in place. install new tires top & down, installed new blade, realigned bearing guides, blade on the tires, reinstall table, back to work
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_3.gif "Part Location Diagram of JT9-BB-608ZZ Jet BALL BEARING")
_WW_3.gif "Part Location Diagram of JT9-BB-608ZZ Jet BALL BEARING")
