Medium
1-2 hours
This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. The coil spring has a sharp end that pierces the insulation of the ignition module\'s wire, and it is the coil spring that makes contact to the wire. This spark plug connection kit is sold individually.
Spark Plug Conn. Kit 501485402
OEM part for: Husqvarna, Poulan, Jonsered
Part Number: 501485402
$11.20
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Spark Plug Conn. Kit will fit the following 1026 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Husqvarna
Poulan
Jonsered
Show More Compatible ModelsThis item works with the following types of products:
- Chain Saw Parts
- Saw Parts
- Blower Parts
- Trimmer Parts
- Grinder Parts
- Pole Saw Parts
- Edger Parts
- Hedge Trimmer Parts
This part replaces obsolete part #: 501485601, 5014856-01, 501547701, 501485501
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great service
OEM parts are OEM parts. what sets eReplacementparts above the rest is that they have everything, in the rare case they have to order a part they communicate with you every step and the turnaround time for orders in general is fantastic.
Guest -
October 5, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spark Plug Conn. Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Hard staring
Joe - May 12, 2018
👍 2 of 3 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Remove old spark plug, set gap and reinstall.
Remove old spark plug boot and clip. Install new boot first then clip, Squeeze clip end with pliers to tighten. Slide boot over clip, it helps if you put a little lube on the wire.
Remove old spark plug boot and clip. Install new boot first then clip, Squeeze clip end with pliers to tighten. Slide boot over clip, it helps if you put a little lube on the wire.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
husky saw 357XP, wiped out from a tree butt falling back on wedge. broke the plug, boot/wire, and top cover
Wayne - July 26, 2021
Tool Type
Chain Saw
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
1. replaced top cover, plug, boot, wire, support
2. started saw and it ran like a top (saw is 13 years old, great saw husky 357xp)
3. went to woods here in montana and saw down another 15 trees(18-24" dia)
4.VERY IMPRESSED!! parts were correct, reasonably priced and delivered in 2 days. will definitely order from these guys again.
2. started saw and it ran like a top (saw is 13 years old, great saw husky 357xp)
3. went to woods here in montana and saw down another 15 trees(18-24" dia)
4.VERY IMPRESSED!! parts were correct, reasonably priced and delivered in 2 days. will definitely order from these guys again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw started this fizzling out at high end when it needed a lot of power.
John - August 20, 2020
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
1. Removed the top cover and cover with the starter rope handle.
2. Disconnected small wire that led to the switch.(This also was the reason my start/stop switch wasn’t working. )
3. Remove the two Allen head screws that hold in the ignition module. Put in a new ignition module. Tighten it down. Reconnected small on off switch wire. Ran wire to the plug in the same route as the one that came out.
4. Trickiest part was connecting the boot and clip that connect the plug wire to the plug. Checked it out on YouTube and it was a piece of cake
5.Cleaned off as much sawdust that had accumulated in 14 years as I could. Put the covers back on. Fired her up and she ran just as great as she always has.
6. Jonsered CS 2171
7 Very pleased with the parts.
2. Disconnected small wire that led to the switch.(This also was the reason my start/stop switch wasn’t working. )
3. Remove the two Allen head screws that hold in the ignition module. Put in a new ignition module. Tighten it down. Reconnected small on off switch wire. Ran wire to the plug in the same route as the one that came out.
4. Trickiest part was connecting the boot and clip that connect the plug wire to the plug. Checked it out on YouTube and it was a piece of cake
5.Cleaned off as much sawdust that had accumulated in 14 years as I could. Put the covers back on. Fired her up and she ran just as great as she always has.
6. Jonsered CS 2171
7 Very pleased with the parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ignition wire was broke.
Sylvester - January 24, 2019
Tool Type
Chain Saw
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Adjustable Wrench
Replaced the wire and other marginal looking parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
