Medium
30-60 minutes
It is made of metal and rubber and is sold individually. The solid state ignition connects to the spark plug cover and helps to generate the voltage used by the spark plug. During installation, a screwdriver and a socket set may be needed when replacing the ignition. This part is an OEM sourced directly from the manufacturer for use in engines and snowthrowers made by Tecumseh, Husqvarna, and Toro.
Lamination (ds 33-346) TC-34443D
OEM part for: Cub Cadet, Husqvarna, Toro, Craftsman, MTD, Tecumseh
Part Number: TC-34443D
$90.42
In Stock
Ships within 1 business day 
Compatibility
This Lamination (ds 33-346) will fit the following 524 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Husqvarna
Toro
Craftsman
Cub Cadet
MTD
Tecumseh
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
- Snowblower Parts
- Lawn Mower Parts
This part replaces obsolete part #: 34443D ((Incl. Ref #28)), TC-34443C, 34443A, 34443C, 33-346, 34443B, 34443D, TC-34443B, TC-34443A
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exactly what was needed
Perfect
Glen -
February 26, 2022
Verified Purchase
Hard to find replacement part
Part arrived promptly, and now my old mower is running again
Guest -
September 5, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Lamination (ds 33-346)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Magneto dead shorted internally
Steve - May 5, 2017
👍 7 of 9 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Disassemble top portion of housing area include simple lift out of gas tank. Rope pull housing also.magneto exposed . Magneto removed with 2 bolts. Magneto checked with digital meter coil to ground. Was internally shorted to ground. Reversed for assembly include simple 0.010 gapping of magneto with flywheel. Started second pull. I was thrilled! Then I had to mow......
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The Solid State Ignition went out, there was no spark to the spark plug.
Lou - January 17, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set
Parts Used
It looked like i had to pull the engine out but after looking at it really good all i had to do was remove the mounting bracket on the pulley side, there's work involved to get the job done, you have to remove the top cover and the back panel where the controls are, once inside to make it easier to replace the part you have to remove the primer hose and unplug the ignition wires and then remove the crank cover, if you mechanically incline you shouldn't have any problems doing this type of repair, if you are not then I recommend taking it in to be repaired.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lawn mower would not start (no spark at spark plug)
Robert - October 14, 2022
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Nutdriver, spacing/feiller gauges (.007)
Parts Used
Removed spark plug wire from plug.
Removed 5 screws from pull start housing and removed it.
Removed 4 bolts from the magneto cover and removed the cover exposing the coil/lamination.
Checked the spacing between the coil and the magneto = .007 air space with feiller gauge.
Removed 2 screws holding the old coil and replaced with the new one.
Made sure there was .007 air space between the coil and magneto and tightened down the screws of the coil.
Reassemblied all previous parts.
The mower started on the second pull..
Removed 5 screws from pull start housing and removed it.
Removed 4 bolts from the magneto cover and removed the cover exposing the coil/lamination.
Checked the spacing between the coil and the magneto = .007 air space with feiller gauge.
Removed 2 screws holding the old coil and replaced with the new one.
Made sure there was .007 air space between the coil and magneto and tightened down the screws of the coil.
Reassemblied all previous parts.
The mower started on the second pull..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Mice chewed spark plug wire off
Glen - February 26, 2022
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Adjustable Wrench, Needle nose pliers
Parts Used
Replaced coil and wire
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
