eReplacementParts.com
877-346-4814
MK Diamond Parts
Repair Parts Home  Power Tool Parts  MK Diamond Parts  151799 Roller Wheel
photo thumbnailphoto thumbnailphoto thumbnailphoto thumbnailphoto thumbnailphoto thumbnail

Roller Wheel

Part Number: 151799
MK Diamond
Availability: 24 in stock
Price: $4.65
Ships within 1 business day
Product Information
Manufacturer: MK Diamond
Product Number: 151799
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
Genuine MK Diamond replacement part, this item is sold individually.
The 151799 Roller Wheel is connected to the cutting table.
This is what the cutting table rolls on to move back and forth.
Because this part is used every time the saw is used, it does wear often.
It is advised to have an extra one or two on hand.
Products Compatibility

This item works with the following types of products:

  • • Saw
  • • Tile Saw
Questions & Answers

How do I adjust the saw to the table?
Randlyl asked on 2020-01-04
Good Day Randlyl. Thank you for your question in regards to your unit. In order for us to assist you into researching the compatible information that goes with your unit, we will need you to provide us with its model number. If you are having difficulty locating your model number we would recommend reaching out to the manufacturer as they should be able to assist you finding it. Best Regards.
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, Adjustable Wrench
Wheel had been tightened to tight at one point so it stopped rolling and wore through the wheel.
I took the bolt out, replaced the wheel and tightened it too tight again. There is a nut on the inside, so I loosened the bolt and tightened the nut effectively locking the bolt down without compressing the wheel so the wheel could roll. I also lubed the bolt prior to installation to keep the hole from wearing through.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Multilube Bearing - 152227
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Wrench Set, hammer and brass rod
table didnt move freely
removed table. tapped out existing bearings. pressed in new ones with c clamp. unbolted roller wheel . bolted on new one . put back together. worked a little better. took back apart and used sand paper to slighty increase hole size in bearings . works good now
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Linear Bearing Assembly 5/8" Diameter - 157126
Rip Guide Small - 134551-MK
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, Adjustable Wrench, Square Gide
We need the parts for my wet saw tile cutting for better finish work tnku
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Protractor, Tile Saw - 134569-MK
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Old wheel worn out
Replaced wheel
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Roller wheels worn out
Removed worn out roller wheels and replaced with new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Wrench Set
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Roller flattened over time
I unscrewed the roller and replaced
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Sleeve - 151781
Roller Wheel - 151799
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Wrench Set
Wheel on sliding table was crumbling and needed replacing
I removed the wheel and replaced it with the new one,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
Wheels were worn and dragging
Removed the bolt holding the old wheels on, and remove the wheels.
Installed the new wheels with the bolt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Tile Saw
Parts Used:
Roller Wheel - 151799
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Roller wheel
MK Diamond 660 tile saw, approx 17 years old. Part worked perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • exactly what was needed
    very simple repair
    Guest - October 3, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: MK Diamond
    Product Number: 151799
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy