Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9246199-1-M-Shindaiwa-V203000700-Bolt
Part Location Diagram of V203000700 Shindaiwa Bolt
See part G-10 in the diagram
( Grid squares measure 1x1 inch )
9246199-1-S-Shindaiwa-V203000700-Bolt 9246199-2-S-Shindaiwa-V203000700-Bolt Part Location Diagram of V203000700 Shindaiwa Bolt

Bolt V203000700

Manufactured by:
Shindaiwa
ERP Number:
ERP9246199
Part Number:
V203000700
Original Equipment Manufacturer ?
  Works with your model  LE231!
$5.95
Special Order
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   LE231!

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

It is an authentic component that is supplied by the original equipment manufacturer for use with Shindaiwa and Echo lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit. Keep in mind this high-quality hardware is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this bolt.

Troubleshooting

This part works with the following brands:
  • Shindaiwa
  • Echo
This part works with the following products:
  • Trimmer
  • Brush Cutter
  • Leaf Blower / Vacuum
  • Edger
  • Chainsaw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replacement of worn out OEM parts

Dennis from Clintwood, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
V203000591, 80221, V203000700, A320000650, A226000650, 90060000005, 90010505055, 12438012710
Just make sure that all of your new parts are laid out separately, in order to allow you to keep everything separate from the old parts that you will be removing. Take your time, clean areas and parts that you will be keeping as you go. Once all parts have been removed and parts cleaned, work your way backwards from the way you removed pa rts when installing the new parts. I use 90 degree type Allen Head wrenches without handles that way I do not over tighten fasteners. I had gasket material that stuck on me around the intake portal to the piston that needed to be scrapped off, so I brought the piston to TDC and stuffed a small bit of rag in the hole to keep debris from getting inside the head.
I also bought from a local store a replacement muffler and muffler bolts and gasket that was installed during this time as well, but the store did not have the other parts I was needing.
EVERY part that I ordered from eReplacement Parts fit exactly as the old parts, I did not have to make any adjustments to the new parts to get them to fit.
When I was finished, I primed the carburetor, adjusted the choke and slid the on/off button to on, and pulled the cord one time and it fired right up. I adjusted the choke and set it down and let it idle as I put my tools up and cleaned up the area I was working in.
I am very happy with my whole experience dealing with eReplacement Parts. I will be ordering again from them.
Read less
Did you find this story helpful?
Thank you for voting!

Nut loosened on hedge trimmer bar securing blades.

Wendell from Madison Heights , Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Parts Used:
V203000700, V304000240, 43302206460
Installed new bolt and tightened nut, Installed zip tie around end of bolt to help prevent nut from loosening under vibration allowing bolt to fall out of hedge trimmer blade guide. Zip tie was previously installed on end of bolt but after two years zip tie failed.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9246199
Manufacturer Part Number: V203000700
Brand Model Number Description
Shindaiwa 350 Chainsaw - Gas Chainsaw
Shindaiwa 357 Chainsaw - Gas Chainsaw
Shindaiwa 416 Chainsaw - Gas Chainsaw
Shindaiwa 451 Chainsaw - Gas Chainsaw
Shindaiwa 500 Chainsaw - Gas Chainsaw
Shindaiwa 80192 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 80280 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 80544 Edger - Multipurpose Lawn Edger Tool
Shindaiwa 80613 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa AH230 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AH231 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa B4000 Brush Cutter - O. E. M. Swisher Brushcutters (B)
Shindaiwa B450AUS Brush Cutter - Brushcutters (B) B450
Shindaiwa B450F Brush Cutter - Brushcutters (B)
Shindaiwa BCK-9 Chainsaw - Uhandleblade Conversion Kits - U-Handleblade Combo Conversion Kit
Shindaiwa BP-35 Brush Cutter - Brushcutter
Shindaiwa BP40LA Brush Cutter - Backpack Brushcutter
Shindaiwa C-25 Brush Cutter - Brushcutter
Shindaiwa C-27 Brush Cutter - Brushcutter
Shindaiwa C230 Brush Cutter - Brushcutter
Shindaiwa C260 Brush Cutter - Brushcutter
Shindaiwa C270 Brush Cutter - Brushcutter
Shindaiwa C270EMC Brush Cutter - Brushcutters (C)
Shindaiwa C282 Brush Cutter - Brushcutter
Shindaiwa C3410 Brush Cutter - Brushcutter
Shindaiwa C35 Brush Cutter - Brushcutter
Shindaiwa E3000 Edger - O. E. M. Swisher Lawn Edgers (E)
Shindaiwa EB8510 Leaf Blower / Vacuum - Blower
Shindaiwa EB8510RT Leaf Blower / Vacuum - Backpack Blower
Shindaiwa EB8520 Leaf Blower / Vacuum - Backpack Blowers
Bolt
$ 5.95
Special Order
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖