This is a genuine OEM replacement part, it is sold individually. This clip is used in various areas of the over 150 outdoor product models shown below. It is most commonly used to clamp hoses or tubes in place.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Replacement part
Exactly as advertised...received all I ordered! I can now charge both of my ring batteries at the same time when needed!!
Guest - May 29, 2019
Verified Purchase
★★★★★
★★★★★
Easy to install
Great fit
Harry - November 18, 2019
Verified Purchase
★★★★★
★★★★★
great parts, they worked as expected
perfect fit for my echo blower ,,,, works great
Guest - January 23, 2020
Verified Purchase
★★★★★
★★★★★
Easy Repair
Ordered a complete list of fuel line replacement parts. Individual package identification matched the exploded diagram and help get the right part in the correct order, in the proper location. Really help the reassembly.
Guest - February 21, 2020
Verified Purchase
★★★★★
★★★★★
Made repot easy
It was just like factory.
Martha - February 20, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Dumped all fuel into a gas can. Used a wire shepherd\'s hook that I made from a hangar, and used it to pull the fuel pipe to the tank opening and popped it out of the tank. Then, removed the grommet using a wide blade screwdriver to get it started out of its seat. Once there, I removed the fuel pipe, fuel line & return, and pulled the
... Read morebrass lines from the old grommet.
Reassembly with new components is simply the same in reverse order. Once completed, install new fuel filter and use the shepherd\'s hook to move the fuel pipe/filter to its original position in the tank.
Removed air filter and carburetor. Pryed out grommet with screwdriver and removed filter and line. Placed filter and clip on line and sprayed the other end with silicone spray and pushed through grommet. Placed filter and line through tank and pushed grommet in. Installed carburetor and air filter.
1. Removed air filter
2. Removed top saw plastic case cover
3. Took phone photos of the carburetor, fuel, and vent lines, and throttle and choke linkage.
4. Loosened control backing plate
5. Unscrewed carburetor
6. Detached fuel and vent lines, grommets and control linkages
7. Plucked fuel filter from t
... Read moreank using a hooked shaped wire
8. Reattached fuel, vent lines, grommets and linkages to new carburetor while cleaning dirt and sawdust along the way
9. Reattached carburetor and put on new air filter and spark plug
Removed the tank grommet then pulled out the old filter, replace the filter on the fuel tube with the clip. And the inserted the new filter back in. The old fuel filter looked fine but the saw just would not run. I decided this might be a cheap fix if it worked. The saw ran great after replacement of the fuel filter. I removed thew air fi
... Read morelter cover and replaced the air filter, then reinstalled the air filter cover.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10053748
Manufacturer Part Number: V490001230
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
