Automatic Air Vent 09911
- Manufactured by:
- Presto
- ERP Number:
- ERP10468416
- Part Number:
- 09911
Does this part fit my model?
Need help finding your model number?Product Description
?This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Pressure Cooker/Pressure Canner Automatic Air Vent will release the excess pressure from in the pot.
Frequently Purchased Together
?Troubleshooting
- Presto
- Pressure Cooker
- Canner
Customer Part Reviews
?- < Prev
- 1
- 2
- Next >
- < Prev
- 1
- 2
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- 2
- Next >
Sealing ring and vent needed to be replaced due to age.
Eva from Port Sain Lucie, Florida
Gasket and air vent needed to be replaced and steam gauge was not accurate on my pressure canner.
Glenda from Malvern, Arkansas
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Wrench (Adjustable)
2. Used pliers to replace air vent.
3. Just inserted the sealing ring.
Very easy!
Needed gasket
calvin from Savona, New York
Sealing ring about 10 yrs old.
John from La Mesa, California
2. Cleaned the lid grooves.
3. Lubricated sealing ring with veggie oil.
4. Inserted the sealing ring into the lid grooves.
Canner and pressure cooker had dried/old rubber parts
Doris from SULLIVAN, Indiana
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Just remover hardened rubber parts and replaced. Then also replaced pressure gauge on canner and both got new gaskets. Very easy repairs. Bought extra rubber gaskets to have on hand because can\'t find them close to me. Jus ... Read more t used screw driver and pliers. Parts were easily switched just had to make sure new pressure gauge was good and tight.
Sealing ring needed to be replaced on pressure cooker
Ann from Brick, New Jersey
50 year old Presto Pressure Cooker
Trey from Brandon, Florida
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 09911
Pressure vent was worn out
Phycilla from DOUGLASVILLE, Georgia
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Parts Used:
- 09911
Air vent fell out and was thrown away
Selina from BAYFIELD, Colorado
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Parts Used:
- 09911
Gasket was shot and wanted to make sure pressure regulator was replaced as well. In needed a new peacock too
Kathryn from Rocky Mount, North Carolina
- < Prev
- 1
- 2
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.