Does this part fit my model?
Need help finding your model number?Jump to:
This genuine OEM bumper in your nailer absorbs the impact and provides cushioning when the piston retracts after driving a nail. It is seated at the bottom of the nail gun cylinder. Due to the repeated stress it undergoes during operation, the bumper wears out gradually. Signs that suggest the need for bumper replacement include unusual noises, reduced driving power, misfires, or visible damage to the bumper. To replace a worn-out bumper, remove the cap and detach the cylinder from the body. With the cylinder and piston removed, you can remove the old bumper. Install the new bumper by placing it in the bottom of the gun using pliers and seating it with the backside of a screwdriver. Reinstall the piston into the cylinder, ensuring it sticks out slightly. Insert this assembly back into the body, ensuring the ridges on the backside of the driver face towards the rear of the gun. Finally, reinstall the cap, place the seal onto it, align the gun body with the cap, and securely fasten it with the screws.
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Driver wouldn\'t rebound/reset behind nail head. Thus, it wouldn\'t set/shoot
Colin from Virginia Beach, Virginia
Driver pin was broken and trigger valve was leaking
Dwight from Puyallup, Washington
Bumper worn out
Octavio from Stockton, California
The nailer was mistakenly oil for an extended period and subsequently damaged the piston and driver,: this is an \"oil-less\" gun
Paul from Culpeper, Virginia
| Brand | Model Number | Description |
|---|---|---|
| Porter Cable | BN200C | Nailer - Brad Nailer |
| Porter Cable | BN200CR | Nailer - Brad Nailer |
| Bostitch | BT1855 | Nailer - Oil-Free Brad Nailer |
| Bostitch | BT1855K | Nailer - 18 Gauge Brad Nailer |
| Bostitch | BTFP12233 | Nailer - Smart Point 18 GA Brad Nailer Kit |
| Craftsman | CMPBN18K | Nailer - 18ga Brad Nailer |
| Craftsman | CMPNC18K | Nailer - 18ga Nrrw Crwn Stplr |
| DeWALT | DWEHF1838K | Nailer - 18ga 7/32 Crwn Flr S |
| DeWALT | DWFP12231 | Nailer - 18 Gauge 2" Brad Nailer |
| DeWALT | DWFP12232 | Nailer - 18 Gauge 1-1/2" x 1/4" Narrow Crown Stapler |
| DeWALT | DWFP12233 | Nailer - 53445 |
| DeWALT | DWFP12233R | Nailer - Pin Nailer |
| DeWALT | DWFP1838 | Nailer - 18ga 1-1/2 Stapler |
| DeWALT | DWFP1838R | Nailer - Stapler |
| DeWALT | DWLHF2025K | - 20ga Engr Floor Stap |
| Bostitch | EHF1838K | Nailer - Flooring Stapler |
| Bostitch | LHF2025K | Nailer - Flooring Stapler |
| Porter Cable | NS150C | Nailer - 18G Stapler |
| Bostitch | SL1838BC | Nailer - Cap Stapler |
| Bostitch | SX1838 | Nailer - Pneumatic Brad Nailer & Stapler |
| Bostitch | SX1838K | Nailer - Oil-Free Stapler |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW.gif "Part Location Diagram of 180461 DeWALT BUMPER")
_WW.gif "Part Location Diagram of 180461 DeWALT BUMPER")
