Genuine OEM replacement part, this item is sold individually. The main purpose of the 180205 Piston/Driver is to strike the fastener in the nose of the nail gun into the material you are nailing. At times this part can bend or break and it will have to be replaced. When you purchase this item it does not include the part number, 180457 Piston Ring.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fast shipping
Easy order process fast shipping part was exactly what was described worked great
Guest - July 6, 2021
Verified Purchase
★★★★★
★★★★★
Parts delivered quickly
The parts came far quicker than I expected.
Guest - December 30, 2021
Verified Purchase
★★★★★
★★★★★
bostitch stapler repair
ordering was easy. parts were recieved in just a few days.
Guest - March 22, 2023
Verified Purchase
★★★★★
★★★★★
Good Service
My parts were correct and worked perfectly and were easily installed. My only problem is the time it took to receive them. But then I understand that part of the problem was the manufacturer.
Guest - April 30, 2021
Verified Purchase
★★★★★
★★★★★
Part delivered as promised
Part worked as expected. My nail driver is going again
Guest - February 11, 2022
Verified Purchase
★★★★★
★★★★★
erplacements comes through again!
Packaged well to prevent shipping damage. Arrived on time with easy tracking. Part was exactly as expected. Easy fix, unfortunately will need additional parts.
Gaylord - November 4, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the four screw holding the cap on and removed the cap
Removed the broken driver
Cleaned the interior of the stapler and oiled it
Placed the piston ring on the new piston and installed it
Replaced the top cap of the stapler
1. Removed the four screws from the head.
2. Pulled head from case.
3. Remove plastic chamber.
4. Remove piston and hammer.
5. Install piston ring on new piston/hammer.
6. Reinstall piston/hammer in plastic chamber.
7. Reinstall plastic chamber and piston/hammer back into case while aligning hammer shaf
... Read moret with hole in striker slot.
8. Reinstall head to case with the four screws previously removed in step one.
Remove the top of the stapler
Remove the piston
Clean the inside completely
Install the piston ring onto the piston and install it in the cylinder
Replace the top cap and drop some oil in to lube it up
Did you find this story helpful?
Thank you for voting!
no longer worked. Had this problem before with other tools
Remove top cover of the nailer
Once removed the driver piston is in the center
Remove plastic ring from old part and put on new part.
Put new part into nailer
Put cover back on.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18980252
Manufacturer Part Number: 180205-K
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 180205-K DeWALT PISTON DRIVER")
_WW_1.gif "Part Location Diagram of 180205-K DeWALT PISTON DRIVER")
