Part Location Diagram of 532110452 Husqvarna Lawn Mower Push Nut
See part I-31 in the diagram
( Grid squares measure 1x1 inch )

Lawn Mower Push Nut 532110452

Manufactured by:
Husqvarna
ERP Number:
ERP9285696
Part Number:
532110452
Original Equipment Manufacturer ?
On Order
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(20 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Craftsman replacement part for use in lawn tractors. It helps to connect the deflector rod to the deflector shield. The metal push nut is a small part and will need to be replaced if it becomes lost or broken. A screwdriver and a set of pliers may be needed to replace this part. This item is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Poulan
  • Weed Eater
  • Craftsman
  • Ariens
  • RedMax
  • Murray
  • Ryobi
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
  • Chainsaw
  • Engine
Part# 532110452 replaces these:
  • 532110452
  • 539107626

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(12 Reviews)
Click to filter by ratings:
  • 5 stars
    9
  • 4 stars
    2
  • 3 stars
    1
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Does the three bagger replacement chute fit my tractor and does attachment hardware come with the chute.
David For model number 917-276601 - October 21, 2023

Hi David, Thank you for your question. This part is not listed for your lawn tractor and the hardware to secure it is sold separately. There is a deflector shield listed for your lawn tractor. The part number for the deflector is 532403004. The hard are to secure it is sold separately. The part number for the deflector rod is 595297001. The part number for the push nut is 532110452. The part number for the deflector bracket is 532192557. The part number for the sleeve cap is 532105304. The part number for the deflector torsion spring is 532197026. The part number for the nut lock is 596040501. We hope this helps!

eReplacementParts Team
October 21, 2023

Did this question help you?
Thank you for voting!
looking for mount hardware for grass deflector should be a long pin with a spring naturally this is a 46 inch cut
Michael For model number YTA22V46 - May 2, 2022

Hello Michael, Thank you for your inquiry. We have researched the model number you have provided and show the pin as part# 595297001, the spring as part# 532197026 and the washer/push nut for the pin as part# 532110452. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
May 2, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(20 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken Cable

Richard from Conyers, Georgia

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
532110452, 532435110
Removed the old cable and spring and replaced with the new one.
Did you find this story helpful?
Thank you for voting!

The deflector shield on mower deck was broke pull off push nut and then pushed out shaft to remove to Flector Shield

George from julian, North Carolina

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Pulled off push nut pulled out shaft from deflector. Shield replace deflector shield and stalled shaft and then installed push nut.
Did you find this story helpful?
Thank you for voting!

Broke off shield/deflector and bent the rod.

Brian from Bloomfield, Connecticut

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
595297001, 532110452, 532192572
1. Removed mounting bracket from mower.
2. Inserted rod through the shield, spring and mounting bracket.
3. Placed push nut on end of rod to hold rod in place.
4. Reattached bracket with shield/deflector attached back onto mower to complete repair.
Did you find this story helpful?
Thank you for voting!

No deflector shield

Robert from Mahopac, New York

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Installed a new deflector shield and parts needed for complete installation. Somehow I lost the push nut so I drilled the deflector rod where the nut should have went and placed a fender washer and cotter pin. Worked fine.
Craftsman 17.5 HP 42\" Mower deck
Did you find this story helpful?
Thank you for voting!

Lawn Tractor deflector shield broken and hinge rod bent

Robert from Morrow, Ohio

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
595297001, 532110452, 532130968
1. Removed two bolts and nuts holding hinge bracket to mower deck..
2. Removed push nut from hinge rod
3. Installed hinge pin through deflector shield and spring.
4. Installed two bolts and nuts into mower deck with hinge in the \"down\" pressure position.
5. Returned tools to tool box and threw away bent hinge pin , push nut, and broken deflector shield.
6. Started mower to cut grass to complete operational check. Every thing worked as advertised.
Did you find this story helpful?
Thank you for voting!

Shield Deflector was broken. Ordered all the new parts to mount it. Very easy and all the parts fit perfect.

Edward from Seminole, Florida

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Assembled the deflector parts to the deflector, unscrewed the two nuts and bolts that held it on, and assembled. Simple when you have the correct parts. Thank You e-replacement.
Did you find this story helpful?
Thank you for voting!

Replace deflector shield

Norman from Naples, Florida

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Remove what was left of the old shield and replace with the new one
Did you find this story helpful?
Thank you for voting!

Deflector broke and spring shot

ed from holiday, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
532110452, 532130968, 532123713
Very easy job just place deflector on deck placed spring in place and ran rod throw and used 10mm socket and taped on push nut on
Did you find this story helpful?
Thank you for voting!

Maintenance was due as we are starting the mow season and this unit has been in use for several years.

Donald from Atascadero, California

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Socket set, Wrench (Adjustable), Wrench set
1. Removed mower deck.
2. Removed drive pulleys and idler pulleys replaced with new pulleys.
3. Installed new bell crank drive, springs, clutch anti rotation bracket.
4. Installed mower deck and deck drive belt.
Did you find this story helpful?
Thank you for voting!

Lawn mower needed a new deflector and hardware

Michael from Punta Gorda, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set, Wrench set
Removed the old hardware and installed the new hardware and new deflector
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9285696
Manufacturer Part Number: 532110452
Brand Model Number Description
Husqvarna 1120-14 Lawn Tractor - Ride Mower
Poulan 11597 Lawn Mower - Lawn Tractor
Husqvarna 124C Edger - 124 C - 952715671 (20103100001-Current)
Husqvarna 125 Lawn Tractor - Lawn Tractor
Husqvarna 12530 Lawn Tractor - Pxt Tractor
Husqvarna 127589 Lawn Mower - Husqvarna Lawn Mower Model 127589 Parts
Husqvarna 130 Lawn Tractor - Ride Mower
Husqvarna 132L Edger - 132 L (19904400001-19920100000)
Husqvarna 1342 Lawn Tractor - Ride Mower
Husqvarna 1342A Lawn Tractor - Ride Mower
Husqvarna 1342B Lawn Tractor - Ride Mower
Husqvarna 1342C Lawn Tractor - Ride Mower
Husqvarna 1342XPA Lawn Tractor - Ride Mower
Husqvarna 140 Lawn Tractor - Ride Mower
Husqvarna 142 Lawn Tractor - Ride Mower
Husqvarna 142R Brush Cutter - 142 R (20001900001-Current)
Husqvarna 145 Lawn Tractor - Ride Mower
Husqvarna 1452XPA Lawn Tractor - Ride Mower
Husqvarna 150 Lawn Tractor - Ride Mower
Husqvarna 1538 Lawn Tractor - Ride Mower
Husqvarna 1542 Lawn Tractor - Ride Mower
Husqvarna 1542A Lawn Tractor - Ride Mower
Husqvarna 1542B Lawn Tractor - Ride Mower
Husqvarna 1542C Lawn Tractor - Ride Mower
Husqvarna 1542D Lawn Tractor - Ride Mower
Husqvarna 1542E Lawn Tractor - Ride Mower
Husqvarna 1542XP Lawn Tractor - (T) (96043000602) (2006-10) Ride Mower
Husqvarna 1542XPB Lawn Tractor - Ride Mower
Husqvarna 1542XPC Lawn Tractor - Ride Mower
Husqvarna 1542XPD Lawn Tractor - Ride Mower