Restore your grill’s performance with this genuine replacement burner tube set, designed specifically for Weber gas grills and sourced directly from the original manufacturer. Made from durable stainless steel, these burners are built to withstand high heat and resist corrosion, ensuring long-lasting use. The set includes three (3) burner tubes, each featuring an igniter mounting bracket, an air adjustment shutter, and a spider screen to prevent blockages from insects and debris.
Installation is quick and straightforward—no special tools required, just a standard screwdriver. To begin, ensure the gas tank is disconnected for safety. Then, remove the screws securing the old burners and detach them from the control valves. Next, position the new burners and secure them using the included hardware. Once everything is in place, reconnect the gas tank and test the burners to confirm proper operation.
This replacement set is perfect for grill owners looking to maintain even heat distribution and consistent flame performance with minimal effort.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Quality parts.
OE parts were a perfect fit. Would order again.
Guest - May 29, 2020
Verified Purchase
★★★★★
★★★★★
Good product specifications lead to correct choice of parts.
Parts arrived quickly and in good conditions. Everything worked out well. Video of the repair also was useful.
Guest - March 24, 2021
Verified Purchase
★★★★★
★★★★★
Great service. Very timely.
Part arrived in excellent time and service was great However, one igniter was broken upon receipt. I took a photo of the broken part if you are interested. Be happy to send the photo.
Guest - July 24, 2021
Verified Purchase
★★★★★
★★★★★
Quality part with complete install instructions
I needed to replace my burners on my Weber Genesis grill and I found the exact replacement at eReplacementParts. The burners arrived ahead of schedule and the package contained the instructions from Weber on how to install the burners. Excellent experience and parts. I will always check with eReplacement for any future purchases.
Guest - June 7, 2022
Verified Purchase
★★★★★
★★★★★
Worked Great
Part looked good and fit perfectly. Took way to long to rcv. the parts! Working great !
Guest - July 9, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Really it\'s straight forward I was doing this in about 20 degree weather not to mention and was still very easy.. What I really liked about the parts I received is they come with new hardware ( bolts) as well .. Great idea just for the fact existing hardware does get rusty from the heat so I would recommend having a socket set vs just a
... Read morescrew driver .. More than likely removing old parts will result in stripped screws etc.. So that why I would use sockets .. Never took apart a grill before but with common sense it is easy .. It\'s for sure much more cost effective than replacing entire grill.. My grill would of been around 800 bucks to replace it .. I bought my parts and working as good as new for 150 bucks .. Very good site to buy parts from ..
Removed three small bolts.
Removed tubes so as to remove the igniters which are clipped on.
Pulled tubes out.
Reattached igniters
Slipped tubes back in place
Installed using the new bolts that came with the product.
Done!
Did you find this story helpful?
Thank you for voting!
Got busy do something else and forgot about burners on high (for preheat) for about 30 minutes, thus burning out starters and effecting burner tubes where they no longer burned efficiently.
It started out as trying to remove steel screws out of an aluminum Weber Grill main frame. These screws are holding the burner tubes to the frame. Since the screws have been in there for 9 years and countless hours of grilling they were not moving. The slots were melted and I could not get a socket on the top of the screws. So out comes t
... Read morehe drill and with a 3/16\" drill bit I drilled the top of the screw off. Never tried to get the remaining screws out of the holes. Since I do not move the grill a lot the burners are sitting on the shelf of the frame and it works great. Either it was this repair or buy a new grill, so it was just the cost of the 3 burner set!!! Once the screws were removed the repair was simple, just watched the YouTube video.
Took out the 3 bolts holding burner tube down. Slid electric igniters off tubes. Replaced tubes and igniters. Dropped in flavorizer bars. Hardest thing was one bolt was burnt and rounded. Other wise easy fix.
Had to remove the old burners by removing the screws that hold them. They were so rusted out that I needed to drill out the screws, heads were gone and had to re-thread the holes which was very time-consuming. Sometimes I understand why people just replace things.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10510984
Manufacturer Part Number: 62752
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
