- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Electronic Ignition Module G651-1300-W1
- Manufactured by:
- Char-Broil
- ERP Number:
- ERP10295980
- Part Number:
- G651-1300-W1
Does this part fit my model?
Need help finding your model number?Product Description
?An electronic ignition module produces the spark to ignite the burner. It is a high quality replacement part that is supplied by original equipment manufacturer for use with Char-Broil grills. It is a battery powered push button ignition module which is sold individually, please note the AA battery is not included.
Frequently Purchased Together
?Troubleshooting
- Char-Broil
- Grill
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hi Gerri, Thank you for your question. The part number listed under your model number for the electronic ignition module is G651-1300-W1. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Main burners were rusty and falling apart. Big yellow flame and unsafe. The ignition module didn\'t work. The heat tents were rusted and burned out.
Ronald from Springfield, Vermont
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- 80029725, G431-0300-W2A, G651-1300-W1, G651-1100-W1
Igniter button was faulty.
Warren from Banton Rouge, Louisiana
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- G651-1300-W1
2. Removed the necessary panels and the wiring.
3. Removed the old igniter.
4. Installed the new igniter.
5. Reinstalled the panels and the wiring along with the new battery.
6. Turned the gas on, pushed the igniter button and the burners lit up as they usually do!
Igniter did not work
Kathleen from Bridgeport, Pennsylvania
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- G651-1300-W1
Disconnected old igniter
Plugged in new part
Replaced the cover
Rusted, worn out grill burners etc.
RUSSELL from Indianapolis, Indiana
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
- Parts Used:
- 80029725, G651-L902-W2, G431-0300-W2A, G651-1300-W1, G501-0010-W1
2. Removed old burner tubes, electrode.
3. Drilled out rivets for burner tube mounts and replaced rivets with supplied hardware.
4. Installed new burner tubes, carry over tubes, and heat tents.
5. Installed propane tank, adjusted burners for correct flame color.
6. Cleaned ex ... Read more terior.
7. Cooked steaks.
- < Prev
- 1
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.