This is a Genuine Manufacturer Approved Control Knob used on Char-Broil Gas Grills. It helps to control your Burners. This part is made out of Plastic and it is Sold Individually. Replacing this part does not require any tools, this Knob fits over the Regulator Shaft. Please note Bezel is Sold Separately.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy to switch it is the exact replacement
Works as intended
Newton - October 4, 2019
Verified Purchase
★★★★★
★★★★★
Quick delivery, accurate order
I purchased a top of the line used grill that had been neglected. Thanks to eReplacement Parts I now have a $500 grill for $200. Fast and accurate is how I best describe my experience.
Guest - May 5, 2020
Verified Purchase
★★★★★
★★★★★
PERFECT FIT
Exactly the same knob that was on my grill. Perfect fit.
Guest - October 26, 2020
Verified Purchase
★★★★★
★★★★★
Knob for Grill
The knob for my grill is OEM quality at a competitive price. Very satisfied
Guest - June 8, 2021
Verified Purchase
★★★★★
★★★★★
Knobs match
These knobs are great ! They look good and for psrdfect
Guest - September 21, 2021
Verified Purchase
★★★★★
★★★★★
Repaired in a flash.
Parts received quickly and they were the right ones. Thanks!
Guest - February 26, 2022
Verified Purchase
★★★★★
★★★★★
Quick repair to restore weathered parts
New knobs to replace sun-damaged OEM parts - fitted perfectly and BBQ looks like new again!
James - March 15, 2022
Verified Purchase
★★★★★
★★★★★
replacement knob for grill
The knob just arrived yesterday and fits perfectly. The rep I spoke with was very helpful and pleasant to work with. I would definitely come back to eReplacement Parts if I have to find something. The phone service was much more satisfactory than using online which resulted in the wrong part and two extra shipping fees. Will not do that again.
Guest - June 3, 2021
Verified Purchase
★★★★★
★★★★★
Easy
Parts were just what I needed and arrived quickly
Gerald - September 29, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Our barbecue hasn\'t worked for a while. I was reluctant to buy a new one, and decided to take the plunge and see if it were worth trying to rebuild the Char-Broil I had (now close to 10 years old). So I did the following:
1. Removed old parts.
2. Cleaned unit.
3. Got online and ordered new parts.
4. When pa
... Read morerts arrived, got frustrated that I had ordered the wrong ones (hadn\'t checked the serial number).
5. Called eReplacement, who helped me figure out the right ones and facilitated the return.
6. Sulked.
7. New parts arrived and were installed within about 25 minutes.
8. Barbecued chicken and corn for dinner.
9. Did the happy dance!
Read less
Did you find this story helpful?
Thank you for voting!
Charbroil Grill burners and crossover tubes were rusted and produced yellow flames.
1. Removed grates and flame tamers. Applied WD 40 to all burner tube and crossover tubes screws.
2. Applied WD 40 and waited I hour. Inserted phillips screwdriver into head of screw and tapped handle with small hammer. Inserted phillips screwdriver into head of screw and tapped handle with small hammer.
3. Applied WD 40 again
... Read more. Waited another hour.
4. Removed screws with high torque screwdriver (8\" shaft). Wasn\'t easy to remove screws. On a few screws, I had to use vise grips.
5. Replaced with new eReplacement parts, using 8 new stainless screws and washers. Didn\'t over-tighten screws.
6. Replaced flame tamers and grates.
7. Now the grill burns hot and blue, with a minimum of flames ups.
Read less
Did you find this story helpful?
Thank you for voting!
Fire bowl rusted out.
robert from PALM CITY, Florida
2 of 2 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Broke all the old stuff off and then vacuumed the entire pit of the grill. The burners and covers fit perfectly. I replaced a bad knob and igniter which was the hardest part only because I had to remove and reinstall screws for the side shelves to remove the knob panel. Other than that the cleaning part took the longest but my 20-year-old
... Read more grill is basically brand new and I\'ve used it twice already even in the middle of winter. Take the time to clean it out with a vacuum while you\'re there it\'s definitely worth the effort.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
