This is a genuine OEM replacement part, it is sold individually. The purpose of the filter is to keep dust and debris from contaminating the carburetor and engine. To replace the filter you can place it in a plastic bag with a little oil and rub the oil into the filter. Then remove the filter and squeeze it in a paper towel to remove the excess oil.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great working with customer service ease of repair
All the parts were spot on and easy to install blower works great now
Thanks Gil
Guest - April 15, 2020
Verified Purchase
★★★★★
★★★★★
spool knob & air filter for weed whacker
spool & knob are fine haven't receieved air filter yet postal service sucks
Guest - May 28, 2021
Verified Purchase
★★★★★
★★★★★
Quick Fix
Part arrived quickly and was easy to install.
Stephen - July 11, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair, part fit, worked perfectly.
Everything fit and worked as expected.
Guest - August 13, 2022
Verified Purchase
★★★★★
★★★★★
Easy orderig due to having part number
Received quickly oil filters for our Ryobi weed wacker. Easier to shop on line rather than trying to find a dealer. Shop that the week wacker was purchased was no longer carrying the parts.
Guest - June 19, 2019
Verified Purchase
★★★★★
★★★★★
Quick and easy to replace.
Part was fully packaged with no rips or tears. the filter element was clean and without flaws.
Trevor - August 2, 2019
Verified Purchase
★★★★★
★★★★★
Fast ship
The parts arrived very quickly. Have not had an opportunity to complete repair.
Guest - October 3, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Using screwdriver, removed fuel tank from trimmer
2. Turned over fuel tank to empty all debris
3. Removed old and deteriorated fuel lines from fuel tank
4. Used screwdriver to clean holes for fuel lines
5. Inserted fuel return line into one of the holes in the fuel tank
6. Removed fuel filter from f
... Read moreuel pick-up line
7. Inserted fuel pick-up line into open hole in the fuel tank
8. Used an opened wire hanger to fish the fuel pick-up line through the spout of fuel tank
9. Inserted fuel filter into fuel pick-up line, end that was fished through the spout
10. Pushed fuel filter and fuel pick-up line into fuel tank through the spout
11. Replaced fuel tank back on the trimmer
12. Pulled both fuel lines from fuel tank to ensure that they can be connected to fuel tank
13. Inserted fuel return line onto right-hand line connector on trimmer motor
14. Made sure that the fuel filter laid at bottom inside of fuel tank
15. Inserted fuel pick-up line onto left-hand line connector on trimmer motor
16. Poured gasoline into fuel tank and covered spout with cover
I had previously changed the carburetor, but, not the gasket. I removed the air filter assembly, Then the mounting screws, pulled the carburetor back and removed the old gasket and replaced it with the new one. Then installed the carburetor. I then installed the new air filter and filter cover.
Did you find this story helpful?
Thank you for voting!
Gas leaked on the filter and it partially dissolved
1. Removed air filter
2. Removed caburetor with torx driver
3. Removed and replaced gasket
4. Installed new carburetor
5. Installed new fuel lines and fuel filter
6. Installed new air filter
7. Test ran leaf blower and adjusted carburetor idle speed
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9139498
Manufacturer Part Number: 791-181757
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 791-181757 MTD Aircleaner Filter")
_WW_1.gif "Part Location Diagram of 791-181757 MTD Aircleaner Filter")
