This is a genuine manufacturer sourced replacement part designed for use with handheld lawn and garden equipment. It is utilized to create an air-tight seal between the carburetor and the insulator. Over time seals tend to become brittle and compressed eventually requiring replacement. This part is made from durable composite material and it is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect
I order from ereplacementparts somewhat frequently as my hobby is fixing power equipment. I’ve yet to be unsatisfied. It’s been my experience that I’m buying the actual name brand replacement, like Walbro, as opposed to some knockoff, at a really reasonable price. Everything I’ve ordered has worked perfectly. I’ll continue ordering from them. Thanks
Guest - June 6, 2019
Verified Purchase
★★★★★
★★★★★
Quick turnaround
Ordered my parts just before a holiday weekend anticipating it to ship the following week. Was not expecting it for a few weeks. Instead I received it by the end of the same week I was expecting it to ship.
Guest - June 15, 2021
Verified Purchase
★★★★★
★★★★★
Great fit
Using your parts list, makes finding the item(s) you need, fast and easy.
Randal - October 6, 2021
Verified Purchase
★★★★★
★★★★★
Gas tank for trimmer
Parts were true replacement, fit perfectly, short lead time. I will always use them again when needed.
Guest - March 5, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
30 - 60 mins
(16 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Trimmer would not stay running anytime I would increase the throttle. I had previously replaced the fuel line, filter and fuel and that didn\'t resolve the problem.
1. Removed all the external plastic housing pieces.
2. Removed the air filter.
3. Removed the fuel tank and hoses.
4. Removed the carburetor.
5. Cleaned all gasket surfaces.
6. Installed the new carburetor and gaskets.
7. Reinstalled all exterior parts in the proper order for assembly.
8. Replaced
... Read more the spark plug as the last step.
9. Fired on the first pull and runs like it\'s a brand new machine.
Took off the top red cover, 3 T25 screws, Removed the air filter, Two T25 screws and one thumbscrew for the cover. Unhooked the throttle cable and the two gas lines. Slid the old carburetor and gasket out and put the new one in making sure the gasket stays lined up correctly. Reassembled and started. Runs like new!
1. Remove the air cleaner and the cover.
2. Remove 2 torque screws holding the carb and the spacer.
3. Remove the fuel lines to the carb.
4. Remove the throttle cable from the carb.
5. Install in reverse order, making sure the spacer is aligned correctly with the carb, i.e. small hole on one side of spacer faces th
... Read moree carb and aligns with gasket, and mounting screws are tight.
I installed the new gas tank which had the tubes that go to the primer ball and carburetor. Then installed the new carburetor with the new gaskets. Put in new gas and it runs like a champ.
1. Remove air filter with Torx
2. Remove 4 screws holding carb and air cleaner assy
3. Remove & replace fuel lines and filter.
4. Discard old carb and reinstall new with new gasket.
5. Test and replace air filter.
Removed the cover and the air breather. Removed the old carburetor and replaced with the new one, along with the gaskets. Put all back together and it started after a few cranks and ran great.
Did you find this story helpful?
Thank you for voting!
Broken fuel lines, gaskets torn on carburetor and cracked purge bulb
Removed carburetor and fuel tank. Installed new fuel tank and new carburetor using two new gaskets. Watched a ereplacement YouTube video regarding proper fuel line placement on the purge bulb and carburetor. Successful repair.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9136642
Manufacturer Part Number: 791-181709
Trimmer
- MTD String Trimmer Model 41AD480C900 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/trimmer/seals-and-gaskets/"},{"position":2,"name":"791-181709","title":"791-181709","url":""}]
_WW_1.gif "Part Location Diagram of 791-181709 MTD Carburetor Gasket")
_WW_1.gif "Part Location Diagram of 791-181709 MTD Carburetor Gasket")
