This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Not complicated!
The whole experience was great. I like when it is not complicated to order something on line, and this was not. I would not hesitate to order from eReplacement parts again.
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
Weed wacker reel
Part was correct, came when it was suppose to and works like a charm
Guest - September 13, 2020
Verified Purchase
★★★★★
★★★★★
Good Job!
The part was exactly what I ordered! Thanks for your service!
Guest - October 1, 2020
Verified Purchase
★★★★★
★★★★★
costumers satisfaction
I am so happy with the excellent service received from " E replacement. shipping was fast and parts were identical to the replacement ordered.
Angel L. - March 30, 2021
Verified Purchase
★★★★★
★★★★★
It worked just fine ty again
Ty
Guest - May 27, 2021
Verified Purchase
★★★★★
★★★★★
Great service. Thanks a lot.
Once I figured out the spring was an add-on from the other old reel, went together easily, and fast. Thanks.
Guest - May 31, 2021
Verified Purchase
★★★★★
★★★★★
thank you parts arrived fast
Things back to normal
Guest - June 15, 2021
Verified Purchase
★★★★★
★★★★★
Trimmer
Would have been nice to know that the design changed at first I thought you shipped the wrong part but it seems to work ok.
Guest - August 3, 2021
Verified Purchase
★★★★★
★★★★★
Quick repair
Fair price,fast shipping
Guest - October 23, 2021
Verified Purchase
★★★★★
★★★★★
Was easy as can be.
Got the part I needed quickly,price was very fair,and could not have Ben easier. Great experience ,I’ll be back again as I have a lot of older craftsman tools
Guest - April 30, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Take the knob, string reel and spring off of the trimmer.
2. Keep the spring if you didn\'t purchase a replacement.
3. Remove the star retaining washer by cutting or prying it off the shaft.
4. Remove the outer housing and clean the shaft then install the new housing and push on the net retaining washer. A deep 1/2\"
... Read moreor 9/16 socket works well for pushing the washer into place.
5. Reload spool and reassemble with the spring, spool and knob. Now get to work.
I removed the old worn out bump knob with the pliers and pulled out the old worn out inner reel and put the replacement parts I got from Replacement Parts.com right on my trimmer. Everything fit perfectly and the new inner reel had the line divider which makes it easier for the line to feed out when needed. I am satisfied with my purchas
... Read moree and the price! Instead of getting a new trimmer for $100 I spent $30 and I\'m trimming away again!:)
Took the lower part of shaft off and removed broken flex drive, measured it looked the part up on ereplacementparts ordered and within 1 week new parts were delivered. Reassembled the trimmer and back in business.
Remove the wing nut or screws (depending on which style you have) from the old guard and replace it with the new one. Install the spring in the inner reel, then thread some line out of the upper housing, then push the inner reel and spring into the upper housing and thread on the bump head knob assembly.
I simply took off the old shaft and replaced it with the replacement one, I did have to use another bolt, the old one wasn\'t long enough to hold the shaft. Once in place I installed the newer inner real, the old shaft was getting so hot it melted the one I had bought before, must of been a bearing problem. The trimmer is working better
... Read morethen when I bought it, thanks, you all rock.
Read less
Did you find this story helpful?
Thank you for voting!
The on/off switch was inoperative and the bump head was worn out causing the trimmer line to jam inside
Removed and replaced the throttle housing assembly that included a new throttle trigger and on/off switch. Very easy to remove the old and replace with the new. Be careful when feeding the wires and throttle cable through the assembly hole to keep them from binding once the assembly is screwed back on. The bump head inner reel and knob w
... Read moreere simple to replace. Just thread fresh line onto the head and install. Everything worked fine.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9119496
Manufacturer Part Number: 753-1155
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
