1. Removed the cutting deck from the mower.
2. Used an impact wrench to dis-assemble and remove the components.
3. Replaced the upper pulleys, the spindle shafts, the shaft housings (mandrills) and the cutting blades.
4. Reassembled the components.
5. Replaced the cutting deck.
Lifted front end of mower and placed on 3 ft. 2x4
Removed mower blade retainer nut , washers and blade found had a broken blade adapter.
then found mandrel was bad.
Removed mandrel Bolts which one of them snapped off.
Removed mower deck pin so front of deck swung down
Removed Mandrel with pulley etc.
Re
... Read moremoved pulley and put on New mandrel.
Put mandrel and pulley back into position raising the mower deck and putting pin back in place; had to fight with the belt a little bit. Put bolts in place, tightened them up for mandrel, put blade adapter on then Blade washer and nut and tightened that down and lowered front of lawn mower.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8904161
Manufacturer Part Number: 17X165MA
Lawn Mower
- Murray Lawn Mower Model 2691226 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.