Genuine Murray replacement part, this item is sold individually. This blade is used on all the Lawn Tractors listed below. Some manufacture send out their blades not completely sharpened (For Liability Proposes). We have an article and video on how to do this in our Repair Center. Or you can have a local lawn shop do this for you. Make sure you put the new Blade on the same way the old on was on.
Troubleshooting
This part works with the following brands:
Murray
Briggs and Stratton
This part works with the following products:
Lawn Tractor
Part# 95103E701MA replaces these:
095103E701MA, 728909BZYP,
★
Customer Part Reviews
?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Worked as expected
Thank you for your fast delivery and correct part
I will recommend you guys!
Guest - June 8, 2020
Verified Purchase
★★★★★
★★★★★
Parts always worked as expected.
I've always receive my orders quickly, and I'm very happy dealing with this company.
Guest - July 4, 2020
Verified Purchase
★★★★★
★★★★★
Lawnmower Parts.
The parts are exact fit and top quality. Delivery was on time. Great place to buy your parts.
Guest - July 22, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit
It came quick and it fits perfectly
Guest - June 14, 2023
Verified Purchase
★★★★★
★★★★★
Exact match perfect fit
The part arrived in great condiction, making for a quick and easy instillation. At the time of order, this part was out of stock, prolonging shipping time. Ordering over a holiday weekend can cause delays in shipping too. This part sees the most wear and tear. It is critical to the operation of the machine. Having a larger stock in this part during the high demend season would be most benfitcal to the custsoms.
Guest - July 18, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Raised Tractor 3 feet above ground to work on it.
Removed old belt making sure to notice it\'s path so I could install the new one.
I took pictures to help with my memory!
Reinstalled new drive belt and plastic pulley (which was broken) but had to loosen rear pulley guides on all pulleys.
Had to unbolt and lift up
... Read moreSteering wheel shaft in order to install new belt properly.
Had to unhook link clip near rear pulley to get new belt on properly.
Tightened everything back in place and no more problems.
Read less
Did you find this story helpful?
Thank you for voting!
Drive belt and drive belt pulley broken, blades was bad deck idler bad
calvin from lizella, Georgia
5 of 5 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Remove the deck made repairs on it, removed steering column and broken drive belt idler and drive belt guides. Installed new drive and idler, steering column, and belt guides. Reinstalled mower deck.
Use a socket to remove the blade nut and the washers. Note which washer goes where. Remove the old blade, don\'t lose the blade adapter. Place the blade adapter on the shaft then the blade. Place the washers on in the correct order and tighten the blade nut. Your blades FIT EXCELLENTLY.
Did you find this story helpful?
Thank you for voting!
Jack-shilf bearings & shaft wore out, the blades were bad, all new parts purchased fit great.
I used my 2 ton engine lift to raise the lawn tractor mower front end high enough to do the repair job easily. 3 of 5 screws attaching jack-shaft to housing broke. Could not remove the spacer from old main shaft to replace with new shaft. Hardware store for new screws, I had metal tubing on hand to make a new spacer. This old machine i
... Read mores working again.
1. Put cutting level at lowest setting.
2. Loosen deck wing nut.
3. Raise deck manually to highest point available while deck lever is still at lowest setting.
4. While deck is raised, tighten wing nut.
5. Release deck to see if height remains at lowest level.
6. Select different height settings and observe d
... Read moreeck to ensure it raises and lowers accordingly.
7. Redo steps 2-6 until satisfied with height lever and deck levels.
1. Removed the cutting deck from the mower.
2. Used an impact wrench to dis-assemble and remove the components.
3. Replaced the upper pulleys, the spindle shafts, the shaft housings (mandrills) and the cutting blades.
4. Reassembled the components.
5. Replaced the cutting deck.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 95103E701MA Murray Single Blade")
_WW_1.gif "Part Location Diagram of 95103E701MA Murray Single Blade")
