Part Location Diagram of 90455-VA2-000 Honda Washer, Wheel
See part M-10 in the diagram
( Grid squares measure 1x1 inch )

Washer, Wheel 90455-VA2-000

Manufactured by:
Honda
ERP Number:
ERP11896180
Part Number:
90455-VA2-000
Original Equipment Manufacturer ?
Special Order
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(9 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This washer is a genuine Honda part that is sourced from the original manufacturer to ensure a high-level of quality. The metal washer is intended to be used with lawnmowers. this part is used to provide spacing between the rear drive wheel bearing and the cover. A hex socket ratchet may be needed to install this part and the washer is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Lawn Mower
  • Snow Blower

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Lost rear wheel bolt & no tread left on rear wheels

Lamar from NEW ORLEANS, Louisiana

8 of 8 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1- New wheels did not come with drive gear on them
2- Had to remove drive gears from both old wheels and install them on each rear wheel
3-After removal and installation on new wheel drive gear had to be locked on using solder gun to melt plastic tangs to lock in place. After the plastic tangs were melted and cooled, the drive gears were locked in place
4-Install rear wheels and go
Did you find this story helpful?
Thank you for voting!

Original tire lost all tread

Tom from Merritt Island, Florida

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Removed the tire and replaced with the new set on my Honda mower - works like a charm!
Did you find this story helpful?
Thank you for voting!

Axle and related parts were worn out

kendall from LOOMIS, California

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Turned off gas to carb
Supported mower vertical
Removed wheels and related parts
Removed blade
Removed belt guide
Removed spring from axle assembly
Removed control cable
Removed axle assembly
Reverse order with new parts
Takes about 11/2 hours
Did you find this story helpful?
Thank you for voting!

Drive gear replacement

Jeff from Inver Grove Heights, Minnesota

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Replaced drive gear and all components.
Did you find this story helpful?
Thank you for voting!

Lawn mower wheel hardware bent.

Edward from San Francisco , California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Removed main axle bolt then wheel and hardware then reinstalled with new parts.
Did you find this story helpful?
Thank you for voting!

Drive train needed to be rebuilt after 15 years

Mark from Mason, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
Followed the great diagrams listed on your site

I want to add you guys knocked it out of the park! All parts ordered where received on time.
Did you find this story helpful?
Thank you for voting!

The original adjusting collar cracked, allowing the right rear wheel to fall off and be loose

Nick from Syracuse, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Removed right rear wheel, removed drive gear that involved many snap rings and bearing. Then removed original collar that was cracked, inserted new parts, bearing and snap rings in reversed order.
Did you find this story helpful?
Thank you for voting!

Missing part

Mike from CHARLESTON, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
90455-VA2-000
Replaced washer behind wheel
Did you find this story helpful?
Thank you for voting!

The wheel height adjustment for the front wheels failed.

Michael from OMAHA, Nebraska

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
This was an old Honda mower my kid picked up a couple of years ago. I welded the left front axle assembly back together and installed the new adjuster levers on both front axels.
Did you find this story helpful?
Thank you for voting!
  • 1