Part Location Diagram of 42661-VE2-800 Honda Pinion Gear
See part P-1 in the diagram
( Grid squares measure 1x1 inch )

Pinion Gear 42661-VE2-800

Manufactured by:
Honda
ERP Number:
ERP11892036
Part Number:
42661-VE2-800
Original Equipment Manufacturer ?
Special Order

Easy 

30 - 60 mins 

(7 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Honda replacement part that has been OEM sourced and is intended to be used with walk-behind lawnmowers. The metal pinion gear attaches to the transmission's drive shaft and is used to interconnect with the wheel's gear to allow the shaft and wheel to rotate in unison. This item is available as an individual replacement part.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Lawn Mower

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(9 Reviews)
Click to filter by ratings:
  • 5 stars
    8
  • 4 stars
    0
  • 3 stars
    1
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(7 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Rear propulsion wasn\'t working on left side

Jason from Aledo, Texas

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Removed wheels
Removed drive gear
Replaced bushings and gear
Reinstalled wheels
Did you find this story helpful?
Thank you for voting!

Axle and related parts were worn out

kendall from LOOMIS, California

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Turned off gas to carb
Supported mower vertical
Removed wheels and related parts
Removed blade
Removed belt guide
Removed spring from axle assembly
Removed control cable
Removed axle assembly
Reverse order with new parts
Takes about 11/2 hours
Did you find this story helpful?
Thank you for voting!

Drive gear replacement

Jeff from Inver Grove Heights, Minnesota

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Replaced drive gear and all components.
Did you find this story helpful?
Thank you for voting!

Loss of self propelled drive due to worn pi+¦on gears.

Richard from Lincoln, Rhode Island

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Wrench set
Parts Used:
42661-VE2-800
Viewed parts schematic and removed the rear wheels and worn gears. Installed the new gears with spacer and snap ring per the schematic then reinstalled the rear wheels.
Did you find this story helpful?
Thank you for voting!

Self propel wouldn\'t work.

Lamont from Del City, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
42661-VE2-800
Removed the back tire.
Removed snap ring, pinion washer and pinion. Careful removing pinion as the pin could fly off as it\'s under spring pressure.
Replaced the spring, pinion, pinion washer and snap ring.
Greased all the parts and put back together.
Did both sides and Ka-Pow!!!
I had self propel back in my Honda mower.
Inexpensive.
Did you find this story helpful?
Thank you for voting!

Replace pinion gear rear wheel drive

Pete from Matthews , North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
42661-VE2-800
Watch the video on YouTube total repair time 20 minutes
Did you find this story helpful?
Thank you for voting!

Self-Propel Gear Pinion stripped; Ratchet Return Spring defective

Steven from LOUISVILLE, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Removed wheel
Removed Snap Ring with Snap Ring pliers
Removed old Pinion Gear
Replaced old Ratchet Return Spring and Ratchet Key with new
Replaced Pinion Gear
Replaced Snap Ring
Attached Wheel
Did you find this story helpful?
Thank you for voting!
  • 1