This is a flat metal washer designed for use with various chainsaw models to enhance the secure fastening of the main drive sprocket within the chain drive. It is an authentic OEM washer meant to be positioned between the main drive sprocket and a securing screw, both available separately. Before making your purchase, it is advisable to contemplate replacing the corresponding screw when replacing this washer. This ensures that they wear uniformly, establishing a sturdy connection, particularly in equipment that experiences substantial vibrations during operation. If you observe wear on your main drive sprocket or encounter issues such as chain skipping or dislodging, contemplate replacing the hardware responsible for its fastening, including this washer, to fortify the entire drive assembly.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
exactly what I needed
Fit perfectly as described.
Patrick - September 22, 2019
Verified Purchase
★★★★★
★★★★★
Love ereplacementparts, if it cannot be found anywhere else , ereplacementparts will have it , it is the site to go for parts
Perfect replacement part
Guest - December 24, 2019
Verified Purchase
★★★★★
★★★★★
easy repair
arrived quickly
Guest - April 22, 2020
Verified Purchase
★★★★★
★★★★★
Exactly what I needed
Perfect fit, great supply of parts, my go to place from now on
Guest - May 27, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair
Love my electric chainsaw. Glad a company in the US sells parts for it. The part came fast, it was easy to order, and I actually talked to a person on the phone
Guest - October 26, 2021
Verified Purchase
★★★★★
★★★★★
Very easy repair
Saw working like new again
Robert - June 6, 2022
Verified Purchase
★★★★★
★★★★★
Arrived quicker than I thought
Good quality
Kern - June 25, 2022
Verified Purchase
★★★★★
★★★★★
chainsaw part
sent quite quickly and it fits
Iglobal - August 23, 2022
Verified Purchase
★★★★★
★★★★★
Easy fix!
Ordering was easy and the parts came quickly!
Gordon - May 9, 2023
Verified Purchase
★★★★★
★★★★★
Great service, fast shipping
It was good that you had the reverse thread bolt and special washer in stock for my Dewalt chainsaw and shipped these items the day I ordered them.
Jim - October 31, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed housing and shield, cleaned up all the dirt and sawdust, pulled out old sprocket, and put on new one. It turned out the screw holding the old washer had not backed out but actually broke off. I used a drill and bit going forward to back out the remnants of the left-handed screw, put on the new washer, and installed the new screw
... Read more. Easy-peasy.
1. I removed the chain guard, the chain guide, and the chain.
2. I removed the broken bolt.
3. I then removed the plastic plate holding the sprocket in place.
4. I then slid off the worn sprocket, replaced it with the new sprocket, installed the new washer, and bolted it on with the left threaded screw.
5. Then I
... Read more put everything back together.
Removed the bar and chain and outer cover with recessed #15 extended star bit. That allowed access to the chain sprocket. Lifted out the old replaced with new along with left hand thread screw and new washer. Reassembled the case bar and chain.
Did you find this story helpful?
Thank you for voting!
Washer and screw were missing causing the chain to come off.
Most of the time was spent scraping and cleaning out the varnish-like crud under the sprocket so the sprocket would seat properly and I would have room to install the retainer ring. The double spiral retainer ring was too stiff to spread by hand so I had to drill out a piece of bar stock for a tool to hold it centered over the spindle an
... Read mored tap the bar stock with a hammer to knock it on.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
