Easy
30-60 minutes
This O-ring is a genuine Honda replacement part. It is compatible with over 150 models of small engines. This ring seals the joint to the fuel tank to prevent leakage. Without this part, potential safety hazards may occur. This item is made of rubber and sold individually. It should be replaced if it is beginning to wear out or is not sealing correctly.
O-ring-13.5 X 1.5-arai 91353-671-003
OEM part for: Honda, Toro, Honda Marine
Part Number: 91353-671-003
$3.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This O-ring-13.5 X 1.5-arai will fit the following 3193 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Honda
Toro
Honda Marine
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
- Pump Parts
- Generator Parts
This part replaces obsolete part #: 91353-671-004 (Serial# (1000001-9999999)), 91353-671-004
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for O-ring-13.5 X 1.5-arai
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
My Honda HS 1132 Snow Blower Carburetor was leaking fuel.
Douglas - November 25, 2020
Tool Type
Engine
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Although I own the Honda repair manual, it was of little help. I tried to find a video for this model on the internet, but could not find one for my HS 1132
Rather than try to figure out what was leaking, I just bought another carb and choke ass. It is not that expensive, compared to almost $4K for a new blower.
I carefully took photos with my cell phone at each step.
You must remove the shroud to get at the carb. After that, it was sort-of obvious what to do.
The choke cable is attached to the choke assembly with a circle clip that was a bear to remove and replace.
Take careful note of the several springs that must be removed and put back.
After assembly, the motor started on the first pull. No adjustments were required.
Rather than try to figure out what was leaking, I just bought another carb and choke ass. It is not that expensive, compared to almost $4K for a new blower.
I carefully took photos with my cell phone at each step.
You must remove the shroud to get at the carb. After that, it was sort-of obvious what to do.
The choke cable is attached to the choke assembly with a circle clip that was a bear to remove and replace.
Take careful note of the several springs that must be removed and put back.
After assembly, the motor started on the first pull. No adjustments were required.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
wasn't taken care of by owners help
JOHN - October 20, 2019
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver
check engine was worn out, purchase a long block, and all parts needed put together started up made adjustments and engine run's great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel leak
David - February 25, 2016
Tool Type
Pump
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set, Wrench Set
Removed fuel tank then unscrewed the old fuel joint and then screwed in the new fuel joint. No more leaks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
