Easy
15-30 minutes
Line roller bushing provides a tight fit between connected parts while allowing for movement with minimum friction. It is an authentic Shimano component which is specially designed for use with fishing reels. If the original item is damaged or is missing, this will provide an identical replacement. This line roller bushing is made of high-quality material and is sold as an individual item. Check the diagram for your model to ensure the correct replacement procedure.
Line Roller Bushing 10PFH
OEM part for: Shimano
Part Number: 10PFH
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Line Roller Bushing will fit the following 121 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Shimano
Show More Compatible ModelsThis item works with the following types of products:
- Reel Parts
This part replaces obsolete part #: RD10184
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Line Roller Bushing
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Line roller ball bearing succumbed to salt water
gene - October 13, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Reel
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Remove and replace rotating parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bail screw got loose and several small parts were lost
Lyndal - August 24, 2022
Tool Type
Reel
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Placed ordered parts on bail screw according to diagram and tightened screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reel made noise when reeling line in.
Paul - June 2, 2020
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Removed old parts and replaced with new part I ordered based on parts diagrams of the reel. The repair was fairly simple and only require a screw driver to disassemble and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Line roller was frozen
David - August 15, 2019
Tool Type
Reel
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
1. Removed old line roller and associated parts.
2. Installed new line roller and associated parts.
3. Made sure new line roller was working.
2. Installed new line roller and associated parts.
3. Made sure new line roller was working.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The line roller bearing was rusted
Lawrence - July 18, 2019
Tool Type
Reel
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
I removed all of the line roller parts and replaced them with the new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Shimano stradic ci4+ reel making noise after fishing extensively in saltwater
Nils - July 9, 2018
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Roller guide was bad.
Jonathan - June 13, 2018
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Ordered replacement roller guide and bearing. Replaced existing with new and reel is as good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bearing noisy.
Richard - August 30, 2017
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Replaced all bearing components, although only the bearing was needed. Works smooth now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ginding sound when reeling line
Darrell - April 24, 2017
Tool Type
Reel
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Small knife
After going some time with a scratchy/grindy sound/feel when reeling narrowed it down to line roller. Didn't do it unless spooling line, oil didn't fix, so ordered all the line roller assembly parts(there are several). Loosened screw holding assembly together, carefully separated bail, paying close attention to the order parts were lined up(also had schematic drawing). Popped out the shaped washer pressed in bail arm recess with knife tip and installed new. Pressed bearing, and roller bushing, and roller together, gave a drop of oil. Then while holding screw in place, slid parts on in proper order(important), made sure ears on nut part were in slots, and reassembled. Fairly straight forward process, although my sausage fingers didn't help with those itty bitty parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
