We sell only genuine Husky ® parts.
Enter Your Model Number
Popular Categories
Husky Replacement Parts by Category
Husky Repair Articles
| How to Fix a 2-Cycle Engine Carburetor | How to Fix a 2-Cycle Engine Carburetor |
 | |
| This article will walk you step-by-step through the process of repairing a 2-Cycle... | This article will walk you step-by-step through the process of repairing a 2-Cycle... |
Same Day Shipping
Toll Free Support
Repair Help & Videos
Commonly Purchased Parts
See More +
Popular Parts
Tube Seal
The purpose of the N044359 Tube Seal is to prevent an air leak.
It is placed on the outlet tube coming from the head of the compressor.
Part Number: N044359
In Stock, 25+ available
$2.99
This is a genuine Porter Cable replacement part, it is sold individually.The purpose of the N044359 Tube Seal is to prevent an air leak.
It is placed on the outlet tube coming from the head of the compressor.
Drain Valve
If it is left in the tank too long it can start to rust out the inside of the tank.
Part Number: N286039
In Stock, 25+ available
$4.84
When you use a compressor the air that is compressed inside the tank will condensate and leave water inside the tank.If it is left in the tank too long it can start to rust out the inside of the tank.
The Drain Valve should be opened up and let the water drain out.
The water will build up if you have a tendency to leave air in your tank for a long period of time.
You should drain your tank after each time it is used to prevent this from happening.
Primer and Hose Assembly
By pressing on the primmer a few times this assembly fills the carburetor with fuel.
When the carburetor has enough fuel in it, the excess fuel is forced back into the the tank through the fuel return line.
Part Number: 791-683974B
In Stock, 25+ available
$19.48
The primer hose is inserted into the fuel tank then connected to the Primer.By pressing on the primmer a few times this assembly fills the carburetor with fuel.
When the carburetor has enough fuel in it, the excess fuel is forced back into the the tank through the fuel return line.
After time the primer hose will become brittle and crack and have to be replaced.
The primer will also lose its elasticity, and may also crack and not be able to suck up the fuel into the carburetor.
And will have to be replaced.
Standard Mulching Blade (21-Inch)
Mulching blades have a more curved style surface and frequently include extra cutting surfaces along the blade edges.
This blade is designed for all the models listed below.
If used correctly with the mulching plug that is inserted into the mower, the clippings will stay under the deck longer and get re-cut.
Part Number: 942-0741A
In Stock, 25+ available
$31.11
This is a genuine OEM replacement part, it is sold individually.Mulching blades have a more curved style surface and frequently include extra cutting surfaces along the blade edges.
This blade is designed for all the models listed below.
If used correctly with the mulching plug that is inserted into the mower, the clippings will stay under the deck longer and get re-cut.
Shear Pin
The purpose of the 738-04124A Shear Pin is to protect your snowblower.
If the auger gets jammed or clogged, the Shear Pin is designed to snap at a certain point of pressure, so it will not damage any other part of the unit.
Part Number: 738-04124A
In Stock, 25+ available
$2.99
This is a genuine OEM replacement part, it is sold individually.The purpose of the 738-04124A Shear Pin is to protect your snowblower.
If the auger gets jammed or clogged, the Shear Pin is designed to snap at a certain point of pressure, so it will not damage any other part of the unit.
Husky Repair Articles
| How to Fix a 2-Cycle Engine Carburetor | How to Fix a 2-Cycle Engine Carburetor |
| |
| This article will walk you step-by-step through the process of repairing a 2-Cycle... | This article will walk you step-by-step through the process of repairing a 2-Cycle... |
