OEM Husky Compressor Parts & Accessories

$18.29

Manufacturer Part Number:: SR060513SV

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to drain your tank after each use—particularly if you tend to le...

Husky Manifold

★★★★★

(6)

$77.39

Manufacturer Part Number:: E108508

This manifold ensures even gas distribution to your appliance’s burners, delivering consistent heat for efficient cooking. Made from heavy-duty metal, it withstands high temperatures and daily use.

Husky Manifold

★★★★★

(6)

$139.50

Manufacturer Part Number:: E106920

The Husky regulator manifold body is part of a large line of genuine replacement parts. This regulator manifold body is constructed with heavy duty aluminum. It accommodates tank and regulated gauges.

DeVilbiss TUBE SEAL

★★★★★

(34)

$6.16

Manufacturer Part Number:: N044359

This replacement tube seal is a high quality item that is supplied by original equipment manufacturer for use with Craftsman air compressors. It is placed on the outlet tube coming from the head of the compressor. Please note this durable rubber tube seal is sold individually.

Campbell Hausfeld Ferrule

★★★★★

(11)

$6.16

Manufacturer Part Number:: ST085200AV

Genuine Campbell Hausfeld replacement part, this item is sold individually. The Ferrule in this case is used on all of the compressors listed below. It is placed inside a Compression Nut of which is on a copper or aluminum tube and then attached to a component of the compressor. It aids in stopping air leaks.

Connecting Rod Assembly – Part Number: N036518

DeVilbiss Connecting Rod Assembly

★★★★★

(10)

$54.31

Manufacturer Part Number:: N036518

This is a Genuine OEM replacement part designed for use with Air Compressors. This kit Includes: Piston Rod, Compression Ring , Cylinder Sleeve & Bearing. Please note that this kit does not include the valve plate, head gaskets, or any other compressor parts. Replacing this kit you would need a Screwdriver, Hex Key/Allen Wrench and Pliers.

VALVE PLATE ASSY – Part Number: N017592SV

DeVilbiss VALVE PLATE ASSY

★★★★★

(24)

$23.10

Manufacturer Part Number:: N017592SV

Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace. It is advisable at this tim...

GASKET HEAD UMC GRAP – Part Number: Z-D24819

DeVilbiss GASKET HEAD UMC GRAP

★★★★★

(7)

$28.86

Manufacturer Part Number:: Z-D24819

This is a genuine manufacturer-sourced replacement gasket, it is specially designed for use with Craftsman air compressors. It is utilized to provide an air-tight seal for the cylinder head, over time it may begin to wear out and crack eventually requiring a replacement to maintain peak performance. Please refer to the appropriate diagrams of your model for the correct location and use of this har...

Husky O-ring, Set Of 2

★★★★★

(15)

$27.38

Manufacturer Part Number:: E108513

This is a genuine Husky replacement part that has been sourced from the original manufacturer to be used with air compressors. The o-rings attach to the compressor's outlet tube. These items are used to seal the connections at both ends of the tube. The o-ring set will include two o-rings.

Husky Outlet Tube

★★★★★

(16)

$57.98

Manufacturer Part Number:: E108525

This outlet tube is an OEM direct from Husky. The aluminum tube is made for use with the C801H, 80 Gal. Stationary Air Compressor. The tube discharges air from the pump to the air compressor tank. A wrench set and thread tape are helpful with the replacement. The outlet tube is sold individually. Please refer to manual and diagrams for safety and repair instructions.

CLAMP HOSE .250 ID – Part Number: CAC-1206-1

DeVilbiss CLAMP HOSE .250 ID

★★★★★

(8)

$6.16

Manufacturer Part Number:: CAC-1206-1

Genuine OEM replacement part, this item is sold individually. This part is used in various places in the compressors listed below. By its part name, it is used to clamp hoses onto certain parts on the compressors.