Medium
30-60 minutes
Genuine Husqvarna replacement part, this item is sold individually.
This hose is connected to the air purge bulb.
The fuel from the is forced thru this tube and in to the carburetor>br> It can also be use as the return fuel line.
Hose 537042401
OEM part for: Husqvarna, Jonsered
Part Number: 537042401
$5.29
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Hose will fit the following 323 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Husqvarna
Jonsered
Show More Compatible ModelsThis item works with the following types of products:
- Trimmer Parts
- Pole Saw Parts
- Saw Parts
- Edger Parts
- Hedge Trimmer Parts
- Pruner Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Great part
Fast shipping with the correct part
John -
December 1, 2020
Verified Purchase
Good parts, fast delivery
eReplacementParts had the parts I needed for my Husqvarna weed eater.
After the order made, I received an email notification that it might take 3 weeks to get parts due to Covid-19 issues.
They were able to get the parts to me in 7 days from order date.
They are now my go to for needed parts.
Brian -
June 22, 2020
Verified Purchase
Great web site!
The model of my pole saw is no longer available but found all the parts immediately on the site , received within days , I’m up and running again. Very rewarding experience! ereplacementparts rock!!!
Guest -
June 12, 2020
Verified Purchase
Good uality parts
Received carb, fuel lines and primer. All parts were like original and not of cheap quality like many places.
Guest -
April 6, 2020
Verified Purchase
On
Exactly what I needed !
bob -
July 22, 2019
Verified Purchase
The part was easy to replace and was the correct part
The part was correct and it said it was in stock. When I ordered it it took almost 2 1/2 weeks to get the package. This isn't the first time this has happened to me with ordering things from here before. They don't even offer overnight or 2 day shipping
Guest -
6 days ago
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hose
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
hose/tank grommets leaked when trimmer tilted during operation
William - June 25, 2022
Tool Type
Trimmer
Difficulty
Medium
Time
1-2 hours
Tools Used
Pliers, allen wrench with the trimmer
Removed covers including recoil starter assy.
Removed fuel tank, disconnecting fuel lines.
drained/emptied fuel tank.
Removed priming bulb and fuel lines.
Removed fuel lines and grommets from fuel tank.
Installed new grommets in tank.
installed new lines in tank.
installed new lines to priming bulb.
installed priming bulb and lines.
connected lines to carb.
reinstalled tank.
reinstalled covers and recoil starter assy.
checked all connections and retightened all screws.
fueled the unit.
Started unit checking for leaks, none found.
trimmer ops ck satis.
Removed fuel tank, disconnecting fuel lines.
drained/emptied fuel tank.
Removed priming bulb and fuel lines.
Removed fuel lines and grommets from fuel tank.
Installed new grommets in tank.
installed new lines in tank.
installed new lines to priming bulb.
installed priming bulb and lines.
connected lines to carb.
reinstalled tank.
reinstalled covers and recoil starter assy.
checked all connections and retightened all screws.
fueled the unit.
Started unit checking for leaks, none found.
trimmer ops ck satis.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
gas leaks
Robert - May 23, 2021
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, allen wrench
Parts Used
bad fuel line
Did you find this story helpful?
Thanks for voting and helping fellow customers!
bad coil
samuel - September 19, 2019
Tool Type
Trimmer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Nutdriver
replace coil
Did you find this story helpful?
Thanks for voting and helping fellow customers!
fuel lines and air purge old and brittle ('09) Husqvarna 223L Trimmer
CHAD - August 22, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Allen wrench
Removed starter assy housing ( 3allen screws ) just for easier accessability , removed top cover ( 1 allen screw ) - took picture of three fuel lines (routing) - simply removed and replaced all above items mentioned . RUNS GREAT ! Cheaper than buying a new trimmer !
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trimmer would not stay running
kellen - June 13, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Allen wrenches
1. Took pictures before I took it apart.
2. Removed all the plastic.
3. Removed the tank.
4. Replaced the hoses and filter on the tank.
5. Replaced the fuel primer on the main unit.
6. Mounted the new hoses to the new carburetor.
7. Removed the old carburetor.
8. Installed the new carburetor and gasket to the trimmer.
9. Reinstalled the tank and all the plastic.
10. Started the trimmer and made adjustments to the carburetor.
11. Installed the carburetor stops to the Jets.
2. Removed all the plastic.
3. Removed the tank.
4. Replaced the hoses and filter on the tank.
5. Replaced the fuel primer on the main unit.
6. Mounted the new hoses to the new carburetor.
7. Removed the old carburetor.
8. Installed the new carburetor and gasket to the trimmer.
9. Reinstalled the tank and all the plastic.
10. Started the trimmer and made adjustments to the carburetor.
11. Installed the carburetor stops to the Jets.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trimmer fuel line broke
Theodore - November 18, 2017
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Allen wrench
1. Remove fuel tank with Allen wrench.
2. Replaced broken lines and filter.
3. Reinstalled fuel tank.
2. Replaced broken lines and filter.
3. Reinstalled fuel tank.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel line had hardened and split. Could not prime carburetor.
Michael - October 22, 2017
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
, 5/32 hex key
1. Dismantled outer cover and pull rope assembly to allow fuel tank to come loose.
2. Had ordered all fuel lines, fuel filter, primer bubble, and air filter from eReplacementParts, not just the one fuel line that had split.
3. Was a wise choice because another fuel line split during disassembly.
4. Model 322L trimmer fuel filter must first be pulled from fuel tank and cut off before fuel line can be removed. Be careful not to disrupt the rubber bushings in the fuel tank the fuel lines pass through. I had not ordered those. The bushings seal the fuel lines to prevent leaks. Mine didn't leak, but I had known, it would have been a good idea to have ordered the tank bushings as a good measure and reassurance you get no leaks.
5. When replacing all fuel lines remember to make a sketch where each fuel line connects. This is important. I should have listed this first. Two lines go to the carburetor and to go to the primer bubble. Don't trust your memory. Make the sketch.
6. The longer fuel line must be pushed into the tank and brought out the fuel cap opening first before you install the filter. Push the fuel filter and rest of fuel line back into the tank. Some fuel line may have to be trimmed.
7. I replaced the other fuel lines trimming off excess, making sure there were no kinks or pinched segments.
8. I reassembled the fuel tank making sure the tank tabs fit snugly into their respective slots on the trimmer body as well as the pull rope assembly. All the while making sure the fuel lines remained routed properly.
9. Finally I verified none of the fuel lines had come undone and reassembled the outer housing. The carburetor air filter was shipped pre oiled and was easily installed.
10. I installed a new spark plug that I had purchased locally.
Pay attention to the assembly before servicing. Clean your trimmer while it's apart with rags and WD40 or some other oil solvent cleaner.
I started the trimmer and it ran great. No leaks from fuel system. Ready to go.
2. Had ordered all fuel lines, fuel filter, primer bubble, and air filter from eReplacementParts, not just the one fuel line that had split.
3. Was a wise choice because another fuel line split during disassembly.
4. Model 322L trimmer fuel filter must first be pulled from fuel tank and cut off before fuel line can be removed. Be careful not to disrupt the rubber bushings in the fuel tank the fuel lines pass through. I had not ordered those. The bushings seal the fuel lines to prevent leaks. Mine didn't leak, but I had known, it would have been a good idea to have ordered the tank bushings as a good measure and reassurance you get no leaks.
5. When replacing all fuel lines remember to make a sketch where each fuel line connects. This is important. I should have listed this first. Two lines go to the carburetor and to go to the primer bubble. Don't trust your memory. Make the sketch.
6. The longer fuel line must be pushed into the tank and brought out the fuel cap opening first before you install the filter. Push the fuel filter and rest of fuel line back into the tank. Some fuel line may have to be trimmed.
7. I replaced the other fuel lines trimming off excess, making sure there were no kinks or pinched segments.
8. I reassembled the fuel tank making sure the tank tabs fit snugly into their respective slots on the trimmer body as well as the pull rope assembly. All the while making sure the fuel lines remained routed properly.
9. Finally I verified none of the fuel lines had come undone and reassembled the outer housing. The carburetor air filter was shipped pre oiled and was easily installed.
10. I installed a new spark plug that I had purchased locally.
Pay attention to the assembly before servicing. Clean your trimmer while it's apart with rags and WD40 or some other oil solvent cleaner.
I started the trimmer and it ran great. No leaks from fuel system. Ready to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Existing hoses (and possibly the air purge) were leaking. Also replaced the fuel tank grommet from a previous order.
Fred - October 6, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
1. Made a note of existing hose connections and routing and removed existing clear plastic hoses and associated fuel tank grommet..
2. Removed air purge.
3. Slid the replacement grommet on one of the fuel hoses and inserted it into the tank.
4. Inserted the air purge.
5. Reconnected all hoses
6. Reassembled the trimmer cases.
2. Removed air purge.
3. Slid the replacement grommet on one of the fuel hoses and inserted it into the tank.
4. Inserted the air purge.
5. Reconnected all hoses
6. Reassembled the trimmer cases.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel line broken
carl - October 11, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Allen wrench
1. Removed engine cover.
2. Removed fuel tank
3. Replaced fuel line and return line
4. Put new fuel filter in tank
5. Replaced tank and cover
6. Installed new spark plug and air filter started right up
2. Removed fuel tank
3. Replaced fuel line and return line
4. Put new fuel filter in tank
5. Replaced tank and cover
6. Installed new spark plug and air filter started right up
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel leaking from grommets.
Chad - September 12, 2016
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx driver
Removed 5 or 6 torx screws, removed fuel lines and old fuel filter. Reinstalled with new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
