866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Vacuum Parts  Hoover Parts  H-38528035 Flat Belt

Flat Belt

Part Number: H-38528035
Hoover
Availability: 6 in stock
Price: $2.99
Quantity:
Order within the next 3 hours
and your part ships today!

*This part replaces obsolete part #: and 38528035.

Description:
Genuine OEM Replacement Power Drive Belt for Hoover Windtunnel models with the Self-Propelled feature. This is a Rubber Belt and it is Sold Individually. It is recommended to replace these belts every 6 months to ensure optimum performance.
Product Information
Manufacturer: Hoover
Product Number: H-38528035
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Products Compatibility

This item works with the following types of products:

  • • Vacuum
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
7 of 9 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Flat Belt - H-38528035
Extension Tube - H-38634074
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belts wore out
Took off the cover on bottom of sweeper, that covers the brush agitator. Removed belts by hand and replaced both with new belts. Also you tube has video of procedure. It takes a little time and effort too stretch flat belt over the wheel but it goes on after a bit of stretching and elbow grease.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Agitator/Brush Roll Assembly - H-48414069
Flat Belt - H-38528035
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Roller was slowing down burning rubber smell
Removed 4 screws from base
Removed roller, unhooked v belt
Removed flat belt
Reversed install of new parts
Reinstalled 4 screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Flat Belt - H-38528035
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Self-propelled feature seem to be "sticking", i.e. the vacuum did not glide across the carpet
1. Removed bottom plate
2. Removed Roller
3. Removed old belts, though not torn/cracked, they seemed streched
4. Attached new belts
5. Re-attached roller and plate

The vacuum is now running great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Flat Belt - H-38528035
Actuator Arm Assembly - H-440007533
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Torx driver
Self-propel on Hoover WindTunnel stopped working. I could see the actuator arm was broken.
I found videos on Youtube that showed exactly what I needed to do to replace the actuator arm. I simply followed those instructions. The 2 belts on the vacuum were not broken but I decided to replace them also since they were about 10 years old, new belts were inexpensive, and I had to remove the old ones anyway to get to the actuator arm. The repair is actually pretty simple but it took me about an hour because I was being extra careful not to do extra damage to the vacuum cleaner. I highly recommend searching Youtube for repairs of this nature.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Flat Belt - H-38528035
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver
The flat belt was worn out.
Removed the old belt, and replace with new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Flat Belt - H-38528035
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The vaccum belt was slipping and making it difficult to enable the self propel operate.
Removed the screws on the bottom and removed the roller then removed the belt and replaced the belt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Flat Belt - H-38528035
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Hoover vacuum.
1. Turned unit upside down and released the bag area to allow it to lay flat as possible.
2. Removed the four screws holding the bottom cover on.
3. Removed both belts.
4. Removed left rear wheel to allow easy installation of upper belt drive belt.
5. Installed lower smaller belt first then installed upper belt.
6. Re-installed upper rear wheel.
7. Installed both lower belts on pulley's.
8. Re-install the four screws holding the bottom cover in place.
9. Placed the machine upright and tried it out. Worked perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Agitator/Brush Roll Assembly - H-48414069
Flat Belt - H-38528035
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Roller brush stopped spinning
Changed the belts and replaced the brush.
The vacuum is as good as new. Glad I checked here--the parts were the right ones!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Turbine Belt - H-38528037
Flat Belt - H-38528035
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belts were old
Just removed the old belts and put in the new very easy to do.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Drive Belt - H-38528034
Flat Belt - H-38528035
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The main drive belt had stretched over time and was not easy to operate
I removed the the cover on the bottom side, removed the roller, removed both belts.
I replaced both the drive belt and the v-belt
I then reinstalled the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Flat Belt - ( H-38528035 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy