Genuine Husqvarna kit. This kit contains the fuel lines, fuel filter and primer bulb and grommet for all of the Husqvarna Blowers listed below. This makes it very convenient when you need all of the separate parts. You can order them in one kit.
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following brands:
Husqvarna
Jonsered
RedMax
Poulan
Craftsman
This part works with the following products:
Leaf Blower / Vacuum
Part# 581798001 replaces these:
545081841, 5817980-01, 581798001,
Videos For installing this part.
?
★
Customer Part Reviews
?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(32 Reviews)
Click to filter by ratings:
5 stars
30
4 stars
1
3 stars
1
2 stars
0
1 star
0
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
A great fix for hard and broken fuel lines
This is the whole fuel fix, you need not hunt up primer bulb, fuel line, and filter. Just disassemble, remove old parts and plug in the new. Reasessemble and get back to work.
Guest - May 4, 2019
Verified Purchase
★★★★★
★★★★★
easy to install
fast service but did not fix my problem
Guest - May 14, 2019
Verified Purchase
★★★★★
★★★★★
Replaced Fuel Line
Great Price, quick delivery & easy installation. Blower started on first pull.
Guest - May 28, 2019
Verified Purchase
★★★★★
★★★★★
Worked great
Fast shipping. Part was exact fit. Easy to replace with help of YouTube video. Blower works great again.
Guest - June 15, 2019
Verified Purchase
★★★★★
★★★★★
Leaf Blower Repair
Parts were easy to look up and fit perfectly. Blower now starts and runs great.
Guest - June 29, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair. Just a couple of screws less then then 30 mins. Started up like brand new.
Great condition. Fit perfectly.
Guest - June 29, 2019
Verified Purchase
★★★★★
★★★★★
Easy Repair, great delivery and quality
Easy Repair, plug and play design and blower is working like new.
Guest - July 16, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
It was a breeze ordering my leaf blower parts .They arrived within the time as expected
Guest - September 18, 2019
Verified Purchase
★★★★★
★★★★★
fuel kit
Part was what we needed and fit perfectly
Guest - October 18, 2019
Verified Purchase
★★★★★
★★★★★
Fuel line replacement
Parts came quickly and were exactly correct. Installed and blower worked great
Guest - November 4, 2019
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
R & R air filter, remove left side blower case, pull carburetor, pull fuel tank. Remove old fuel tank bushing and filter, insert new filter assembly into tank, clean carburetor & reassemble. Replace carburetor, left side blower case, air filter. Start motor and readjust carburetor.
Did you find this story helpful?
Thank you for voting!
It was not getting gas to carburetor.
Stephen from San Antonio , Texas
13 of 13 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
The gas was not coming into the primer bulb when I pumped. I replaced the tubing and fuel filter with the kit. It works fine now. I\'m not a mechanic and I didn\'t find it to be difficult. I was happy to repair it myself because it would be cost prohibitive to pay a repair shop. I would have tossed it and bought a new one instead. Thanks
... Read moreto eReplacement Parts!
Read less
Did you find this story helpful?
Thank you for voting!
Blower would not idle and would only run wide open then cut off.
1. Removed the breather cover, hurled knob.
2. Removed the breather filter.
3. with a nut driver, removed the 2 hex nuts holding the air breather assembly and carburetor and gaskets in place.
4. fuel tank to carburetor hoses were deteriorated, so while removing carburetor, removed existing hoses from fuel tank and attach
... Read moreed the new fuel line kit hoses to the new carburetor in the same sequence.
5. Used a screw driver to pry the rubber fuel line assembly boot from the fuel tank.
6. inspected fuel tank for debris.
7. inserted fuel tank hose and filter into fuel tank and using some vas aline, lubricated the rubber boot and pressed into place on top of fuel tank.
8. installed new gasket and carburetor onto the mounting bolts, installed the second new gasket to carburetor face, installed air breather housing and two hex nuts and tightened with a nut driver.
9. Installed the breather filter and breather cover.
Filled tank with fresh fuel, primed and started.
10. Ran for a short time on medium choke until warm then blew some crap out of the driveway from the neighbors trees!
Removed all housings, carb, gas tank. Installed new gas line kit and put everything back in reverse. No big deal. Personal comment, \"ereplacementparts\" has done good by me for many replacement parts.
1. Removed and replaced the old fuel line and primer bulb.
2. Replaced the spark plug.
3. Added a new fuel filter.
No hassles with the wrong size or length of the fuel line. Was extremely east to complete.
1. Removed side cover of my Husqvarna blower
2. Removed gas tank and fuel lines
3. Removed cover containing the primer bulb, a must to get the bulb out
4. Removed air filter unit to access and route the master fuel line beneath the carburetor
5.Replaced eReplacementParts complete fuel line and bulb assembly. Came a
... Read mores one unit with all parts properly connected and ready to be attached to the primer bulb cover, carburetor and and tank as required
6. Reinstalled the above parts in reverse order
The assembly purchased from eReplacementParts is excellent quality and is the same part that the factory installed. The price was very reasonable and the order was processed quickly. The grommet that fits the gas tank (contains master fuel line w/filter and the pressure priming line) will require some muscle to install. It is a very tight fit, but necessary to maintain priming pressure. Just be patient and keep working with it. The assembly comes with instructions to fit the unit into the fuel tank, but nothing regarding connecting the lines to the carburetor. So, pay careful attention to the existing fuel line connections and routing.
I removed the starter rope assembly and then I removed the housing bolts so that I could get to the fuel tank in order to remove the old fuel lines and install the new fuel line kit. The task was quite easy and the new fuel line kit was a perfect fit. I then put everything back together and fired the blower up and it run great. Now my wif
... Read moree is happy that she can get back to work. Oh! did I tell you that operating the hand held blower is my wife\'s job?
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9982433
Manufacturer Part Number: 581798001
Leaf Blower / Vacuum
- Husqvarna Leaf Blower Model HVA125BX Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
