Part Location Diagram of 545008084 Husqvarna Chainsaw Gasket Foam Kit
See part A-61 in the diagram
( Grid squares measure 1x1 inch )

Chainsaw Gasket Foam Kit 545008084

Manufactured by:
Husqvarna
ERP Number:
ERP9030153
Part Number:
545008084
Original Equipment Manufacturer ?
$29.87
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This gasket foam kit is an OEM direct from Husqvarna. Made for use with many lawn trimmer devices, the kit provides sealing items for the motor. The gasket foam kit includes seals, gaskets and other items for the repair. A screwdriver, pliers and an adjustable wrench are needed for the replacement.

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Craftsman
  • Poulan
  • RedMax
This part works with the following products:
  • Trimmer
  • Brush Cutter
  • Edger
Part# 545008084 replaces these:
545008084, 545030101, 545081898,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Would not start. Carburator was plugged up and would not deliver fuel with plunge bulb. Tried carb and choke cleaner. Spark was good.

Robert from Hemphill, Texas

10 of 10 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
545081848, 545008084, 530150253
1st Drain remaining fuel and discard. Unpacked the new parts and familiarized with all.Took off cover with nut driver. Discarded used air filter and replaced it with the new one and set it aside. The throttle cable and fuel tubing were removed with needle nose pliers. Removed the old carburetor. Removed old gasket and installed the new. Replaced the old carb with the new. Without cover the carb is loose for attaching the throttle cable first and then the fuel tubing. Used needle nose pliers to attach the throttle cable and to attach the tubing to the new carb and carefully slid them up snug to the carb. Tested the throttle and it worked properly. Replaced cover. Tightened cover nuts with nut driver. Added fresh oil and gas mix. Pumped the new plunge bulb about 4 to 6 times, with no throttle pulled 2 times at full choke, and then on 3rd pull at half choke it fired up. I let it warm up for10+/- seconds and flipped off the choke. Idle is slightly high but haven\'t changed it with the idle adjust screw yet. Went right work and it ran for about 2 hours like it was brand new.
Did you find this story helpful?
Thank you for voting!

carburator bad, would not start and will run then stop, hard to start.

Jerry from LAFAYETTE, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
changed carburetor , fuel tank assembly , gaskets and airbox cleaned up trimmer before repairs to be made , works like NEW unit thanks for the replacement parts , accurate and precise parts , worked without hessentation.
Did you find this story helpful?
Thank you for voting!

Low compression. Would not run

Stephen from Winter Park, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
575227901, 545008084
Tore down the motor and replaced the piston ring, with help with one of your youtube videos. Compression is good now.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9030153
Manufacturer Part Number: 545008084
Brand Model Number Description
Husqvarna 124C Trimmer - Husqvarna String Trimmer Model 124C/2006-05 (124C/200605, 124C/2006 05) Parts
Husqvarna 124L Trimmer - Husqvarna String Trimmer Model 124L/2006-05 (124L/200605, 124L/2006 05) Parts
Husqvarna 124R Brush Cutter - Brushcutter
Husqvarna 125C Trimmer - Trimmer
Husqvarna 125C-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125E Edger - Edger
Husqvarna 125E-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125L Trimmer - Trimmer
Husqvarna 125LD Trimmer - 125 Ld, 20061000001-20064900000
Husqvarna 125LDX Trimmer - Husqvarna String Trimmer Model 125LDX Parts
Husqvarna 125LDXTEST Trimmer - 125ldx Test (2010-06)
Husqvarna 125LSST Trimmer - Gas Line Trimmer
Husqvarna 125R Brush Cutter - Brushcutter
Husqvarna 125R-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125RJ Brush Cutter - Brushcutter
Husqvarna 128C Trimmer - Trimmer/Edger
Husqvarna 128CD Trimmer - 28cc Gas Line Lawn Trimmer
Husqvarna 128CD-LOWES Trimmer - Gas Line Trimmer
Husqvarna 128DJX Trimmer - Husqvarna String Trimmer Model 128DJX Parts
Husqvarna 128L Trimmer - Husqvarna String Trimmer Model 128L/2008-09 (128L/200809, 128L/2008 09) Parts
Husqvarna 128LD Trimmer - 128 Ld (Usa, Canada) (Lowes) (2008-11)
Husqvarna 128LD-LOWES Trimmer - Gas Line Trimmer
Husqvarna 128LDX Trimmer - Husqvarna String Trimmer Model 128LDX/2008-12 (128LDX/200812, 128LDX/2008 12) Parts
Husqvarna 128LX Brush Cutter - 128 Lx
Husqvarna 128PS Pole Saw - 128ps
Husqvarna 128R Brush Cutter - Brushcutter
Husqvarna 128RJ Trimmer - Husqvarna String Trimmer Model 128RJ/2009-08 (128RJ/200908, 128RJ/2009 08) Parts
Craftsman 358791300 Trimmer - Trimmer
Craftsman 358791980 Trimmer - Trimmer
Craftsman 358792010 Trimmer - Trimmer