eReplacementParts.com
877-346-4814
Porter Cable Parts
Repair Parts Home  Power Tool Parts  Porter Cable Parts  42950 1/2\\\" Collet Assembly

1/​2\\\" Collet Assembly

Part Number: 42950
Porter CableBlack and DeckerDeltaDeWALT
Availability: 6 in stock
Price: $21.06
Order within the next 11 hours
and your part ships today!
Product Information
Manufacturer: Porter Cable, Black and Decker, Delta, DeWALT
Product Number: 42950
Classification: Accessory
Weight: 0.08 lbs.
Shipping: Ships Worldwide
Description:
This is an Authentic Manufacturer Approved replacement part used on Routers. This part provides a firm grip for holding a bit in a tool. It is made out of Metal and is Sold Individually. This Collet is for using bits with 1/2" arbors only. Includes the 1/2" Collet and a Collet Nut.

Due to prolonged, heavy use a Collet may need to be replaced eventually.

To replace this Collet you would need to use a Wrench.

• First you would need to remove the Collet Nut
• Once the Nut is removed you can remove the old Collet
• Place a new one in place
• Tighten the Collet Nut back in place and your unit is ready to use 1/2" Bits
Compatibility

This part is compatible with the following machines:

Porter Cable
690 Fixed Base Router
6302 Type 1 Router
6302 Type 2 Router
6902 Type 3 Router Motor
6302 Type 4 Router
6902 Type 1 Router Motor
6902 Type 2 Router Motor
6302 Type 3 Router
6902 Type 4 Router Motor
6902 Type 5 Router Motor
6902 Type 6 Router Motor
6902 Type 7 Router Motor
6902 Type 8 Router Motor
690LR Fixed Base Router
690LRVS Fixed Base Variable Speed Router
691 Type 1 D Handle Router
691 Type 2 D Handle Router
691 Type 3 D Handle Router
691 Type 4 D Handle Router
691 Type 5 D Handle Router
691 Type 6 D Handle Router
691 Type 7 D Handle Router
6911 Type 2 D Handle Route Base
6911 Type 3 D Handle Route Base
6911 Type 4 D Handle Route Base
6911 Type 5 D Handle Route Base
6911 Type 6 D Handle Route Base
6911 Type 7 D Handle Route Base
6912 Type 1 D Handle Router
6912 Type 2 D Handle Router
6912 Type 3 D Handle Router
6912 Type 4 D Handle Router
6912 Type 5 D Handle Router
6912 Type 6 D Handle Router
6912 Type 7 D Handle Router
693 Type 1 Plunge Router
693 Type 2 Plunge Router
6931 Type 1 Plunge Router
6931 Type 2 Plunge Router
694917 Type 1 D Handle Router
694917 Type 2 D Handle Router
694917 Type 3 D Handle Router
694917 Type 4 D Handle Router
694917 Type 5 D Handle Router
694917 Type 6 D Handle Router
694917 Type 7 D Handle Router
6911 Type 1 D Handle Route Base
694 Type 1 1-3/4HP Variable-Speed Multi-Base Router
891 Type 1 2-1/4HP GripVac Router
891 Type 2 2-1/4HP GripVac Router
892 Type 1 2-1/4HP Fixed Base Router
892 Type 2 2-1/4HP Fixed Base Router
893 Type 1 2-1/4HP Multi-Base Router
893 Type 2 2-1/4HP Multi-Base Router
894 Type 1 2-1/4HP Multi-Base GripVac Router
894 Type 2 2-1/4HP Multi-Base GripVac Router
895 Type 1 2-1/4HP with Router Table Height Adjuster Multi-Base Router
7539 Type 5 V-S 3 1/4 H-P Plunge Router
7519 Type 3 3 1/4 HP Router
7518 Type 3 V-S 3 1/4 H-P Router
75182 Type 3 Variable Speed Router Motor
5182 Type 1 Motor
5182 Type 2 Motor
5182 Type 3 Motor
5182 Type 4 Motor
630 Type 1 1HP Router
6702 Type 1 Router Motor
7537 Type 1 2-1/2 HP Router
7536 Type 1 2-1/2 HP Router
518 Type 1 Router
518 Type 2 Router
518 Type 3 Router
518 Type 4 Router
75362 Type 1 Router
8902 Type 1 Router
890 Type 1 Router
7529 Type 1 Plunge Router
7538 Type 3 Speedmatic Plunge Router
75372 Speedmatic Router Motor
7538 Type 1 Speedmatic Plunge Router
7538 Type 2 Speedmatic Plunge Router
694 Type 8 1-3/4 HP Variable-Speed Multi-Base Router
693LRP Type 8 1-3/4 HP Multi-Base Router
691 Type 8 1-3/4 HP D-Handle Router
9690LR Type 1 1-3/4 HP Router
895 Type 2 2-1/4HP with Router Table Height Adjuster Multi-Base
7538 Type 6 Plunge Router
6902VS (Type 8) Vs Router Motor Only
7519EC (Type 3) Router
7519EC (Type 4) Router
2460-75192E (Type 3) 240v 75192 Router Motor W
6902VS (Type 1) Vs Router Motor Only
75362R (Type 1) Router Motor
J-5182 (Type 1) Motor for #518
J-5182 (Type 2) Motor for #518
J-5182 (Type 3) Motor for #518
J-5182 (Type 4) Motor for #518
PC7529 (Type 1) 2 Hp Vs Plng Rtr
PC7529 (Type 2) 2 Hp Vs Plng Rtr
PC7529 (Type 3) 2 Hp Vs Plng Rtr
9690 (All Types) Router Kit
J-630 (All Types) Router 1 Hp
694VK (Type 1) 1-3/4 Hp Vs Rout Kit
J-6702 (Type 1) Router Motor
893PK (Type 1) 2-1/4 Fb+pb Kit
894PK (Type 1) 2-1/4 Pb+fb+grip Vac
895PK (Type 1) Router
893PKL (Type 2) 893pk W/ Height Adjustor
893PK (Type 2) 2-1/4 Fb+pb Kit
894PK (Type 2) 2-1/4 Pb+fb+grip Vac
895PK (Type 2) Router
694VK (Type 8) 1-3/4 Hp Vs Rout Kit
22-7519-60 (Type 1) 220v 3-1/4 Hp Router
J-7536 (Type 1) 2 1/2 H.P.Router
J-7537 (Type 1) 2 1/2 H.P. Router
Black and Decker
Delta
DeWALT
Expand the 128 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Router
  • • Shaper
Questions & Answers

Will the snap ring from my 1/4" collet fit the half inch collet. I ask this as a snap ring was not mentioned. If I need a different snap ring what is the correct part number. Thanks
Dave for model number 6902 asked on 2020-01-04
Good Day Dave. Thank you for your question in regards to your unit 6902. Based on our research the part number for the part that is compatible with your unit is 823030. Hope this helps. Best Regards. .
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Shaper
Parts Used:
1/2\\\" Collet Assembly - 42950
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, tools that come with the shaper
Could not use 1/2 inch router bits, needed a 1/2 inch collet
Take the 1/4 inch collet out and replace with 1/2 inch collet
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
1/2\\\" Collet Assembly - 42950
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Original collet was broken
Unscrewed old collet
screwed on new collet
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Cord - A11126
1/2\\\" Collet Assembly - 42950
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, wire stripper
The rubber reinforcement on the power cord was broken causing the cord to fray and the collet was missing.
I removed the cover on the top of the router and unscrewed the bolts holding the power cord in.I then removed the old cord and laid it aside.I then lined up the new power cord alongside the old one cutting the the wires to match the old length.I then installed a wire end to complete the ground and put everything back together.Works like a charm again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Open End Wrench - A22709
1/2\\\" Collet Assembly - 42950
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Purchased a used router. Missing the 1/2 inch collet and collet wrench
Removed 1/4 inch collet and nut
Installed the 1/2 inch collet and nut. Used wrench to hold motor shaft and to tighten nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
1/2\\\" Collet Assembly - 42950
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
I needed a 1/2 inch collet
Removed the 1/4 inch collet from the router, and installed the new 1/2 inch collet. With the wrenches provided with the router when purchased.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Router
Parts Used:
1/2\\\" Collet Assembly - 42950
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Just needed a 1/2 inch collet, which did not come with the original purchase.
Simply remove the 1/4 " collet and replace with the 1/2 " collet.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
3.6
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
1
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Good, worked as expected
    Great service
    Guest - November 28, 2019 Verified Purchase
    collet, 1'2"
    great condition, came on time. correct one
    Nathan - July 2, 2019 Verified Purchase
    Collet
    Received volley in approved time, in good condition, and will work great.l
    Guest - May 21, 2019 Verified Purchase
    Not as good as they used to be, material is soft, and snap-ring is junk.
    If you use these, don't over-tighten them. They should choke the bit evenly and parallel. If you give it the atomic crank with the wrenches, the end of the collet will flare outward with each use and eventually they will be prone to spit the bit out, as the choke is only at the end of the shank and the open end isn't even touching the bit. If you have helpers in your shop, teach them proper collet theory.
    Dave - May 2, 2019 Verified Purchase
    Handling charges
    This product was way too expensive from a handling charges point of view. Your campany while providing a service did so in an abusive way.
    Guest - May 8, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Porter Cable, Black and Decker, Delta, DeWALT
    Product Number: 42950
    Classification: Accessory
    Weight: 0.08 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for 1/2\\\" Collet Assembly
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy