866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Bosch Parts  1607014116 Carbon Brush Set

Carbon Brush Set

Part Number: 1607014116
Bosch
Availability: 25+ in stock
Price: $9.92
Quantity:
Order within the next 8 hours
and your part ships today!
Description:
Genuine Bosch replacement part
Set of 2 Carbon Brushes with wire lead attached.

• Worn brushes are frequently the cause of a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.


Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Product Information
Manufacturer: Bosch
Product Number: 1607014116
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Drill
  • • Grinder
  • • Hammer Drill
  • • Laminate Trimmer
  • • Nibbler
  • • Plate Joiner
  • • Polisher
  • • Router
  • • Sander
  • • Saw
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - 1607014116
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Wire moulded into carbon brush burnt off.
1. Removed back cover screws and cover
2. Removed spring advancers and pieces of old brushes
3. Blew out all the dust and debris
4. Cleaned commutator with stone
5. Installed new brushes into holders and put spring advancers back in place
6. Pushed wires from each brush onto terminals
7. Replaced back cover and screws
8. Tested to make sure repair was successful
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
On/Off Switch - 1607200086
Carbon Brush Set - 1607014116
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Problems turning on unit
1. Remove rear screw on handle/case and slide away from head.
2. Remove and replace brushes and switch.
3. Replace case and insert rear screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon Brush Set - ( 1607014116 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy