866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  MK Diamond Parts  151774 Carbon Brush Set

Carbon Brush Set

Part Number: 151774
MK Diamond
Availability: 25+ in stock
Price: $24.28
Quantity:
Ships within 1 business day
Description:
This is a manufacturer sourced replacement part used on a MK Diamond tile saws. It includes two (2) carbon brushes with lead wires and springs attached.

Carbon brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time.

You would need a screwdriver and pliers to complete this job.

• First remove screw holding the cover
• Remove the housing/cover to gain access to armature and brushes
• Remove the old brush
• Install the new brush
• Reassemble and test your tool
Product Information
Manufacturer: MK Diamond
Product Number: 151774
Classification: Part
Weight: 0.02 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Saw
  • • Tile Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
6 of 6 people found this instruction helpful
Tool Type:
Tile Saw
Parts Used:
Carbon Brush Set - 151774
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes were worn out
Remove the brush caps with a screwdriver
Remove the old brushes
Install the new brushes
Install the brush caps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Tile Saw
Parts Used:
Carbon Brush Set - 151774
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The brushes were froze up had to chip them out installed new ones it works like brand new
Unscrewed the plastic caps on each side of the unit, removed old brushes and installed new brushes, put caps back on and started it up ran great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Tile Saw
Parts Used:
Carbon Brush Set - 151774
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn out bushings
Used screwdriver to remove the brush caps on each side of saw, inserted removed the old brushes , then installed the new ones.Then replace the brush caps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Carbon Brush Set - 151774
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Tile saw stopped running
1. Took old brush set out of tile saw.
2. Install new brush set
3. Turn on MK saw , worked great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Carbon Brush Set - 151774
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Tile saw would not work, until I changed the brushes.
My tile saw would not work, I changed the brushes and it's as good as new. Save myself lots of money and time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Saw
Parts Used:
Carbon Brush Set - 151774
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes were worn
Simply remove the brush caps with a screw driver and remove the worn brushes, and install the new brushes, then screw the brush caps back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
120V Electric Water Pump - 155987-MK
Carbon Brush Set - 151774
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Brushes had worn out and was inoperative.
Remove the brush caps with a screwdriver and remove the old brushes. Install the new brushes and screw the brush caps back on. The pump replacement entailed putting the new pump on the old tubing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon Brush Set - ( 151774 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Armature Brushes

Claud

where can I find replacement brushes for mk370 1/2 hp tile saw
Question: Question

sef575

Hello, can you tell me if these would be the correct replacement brushes for the MK 470? Thank you
WJA
Hello sef575,

The Brush Set for the MK-470 Tile Saw is part number 151774.

-WJA
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy