866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Vacuum Parts  Hoover Parts  H-440001354 Brush Block Drive Pin

Brush Block Drive Pin

Part Number: H-440001354
Hoover
Availability: 23 in stock
Price: $36.56
Quantity:
Order within the next 3 hours
and your part ships today!

*This part replaces obsolete part #: and 440001354.

Description:
Genuine OEM Hoover replacement part, this item is sold individually. This part is connected to the Brush Block to rotate the brushes in certain Hoover Vacuums. This kit includes the Pin and the Screw.
Product Information
Manufacturer: Hoover
Product Number: H-440001354
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Stair and Upholstery Tool - H-38613040
Brush Block Drive Pin - H-440001354
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
This was a carpet cleaning machine and the floor brushes had stopped revolving
Removed the rotating brush assembly, (plastic tabs snap in and out) and could see that the drive pin was in two pieces. I was able to find and order a replacement from eReplacementparts.com and ordered the Stair/Upholstery tool at the same time. The pin attaches to the brush assembly with a single Philips head screw, removing the old one and installing the new was easy and only took a minute. Unit works fine now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brush Block Drive Pin - H-440001354
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The brushes on my carpet cleaner stopped working.
I removed the brushes and found the plastic drive shaft was broken.
I took the assembly to my local dealer who wanted to sell me a new one for like $100
I went to Replacement Parts and found the part for $3.00
Received the part quickly, slid into the hole, tightened the screw, put the brushes back and viola, it worked like a charm.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brush Block-6 Brush Abtimicrobial - H-304334001
Brush Block Drive Pin - H-440001354
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Drive pin was broken
Replaced the brush block with the broken drive pin as a quick fix because the machine is used in rental properties and delays are unacceptable. Used a #0 phillips screwdriver to remove brush from broken drive pin but drive pin was broken too close to the brush block so the clear brush guards had to be removed to pull the brush off of the broken drive pin. Once the brush was removed it was simple to push the broken drive pin out the other way. The new drive pin was installed and the brush block was reassembled. Lesson learned: the brush block should be cleaned from time to time to keep dirt and hair build-up. The dirt build-up had caused the brushes to seize and break the drive pin.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brush Block Drive Pin - H-440001354
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The brush drive pin broke
I removed the brush assembly
Unscrewed the screw holding the pin
Screwed it into the new one
Snapped the assembly back in place
Tested it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brush Block Drive Pin - H-440001354
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Drive pin broke
Remove brush assembly
Remove side guard
Remove set screw
Install drive
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Brush Block Drive Pin - ( H-440001354 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Grey Plastic Hex Head And Easy T...

longplaypg

I hope this is the grey plastic hex head that drives the brush bar. This thing seems to break easy with only 2 months of ownership. I will see when it arrives. If you have purchased 1 of these please post a picture of it.
Brushes won't spin what do I need to check to try to fix or order part


Hoover fh50230
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy