Easy
1-2 hours
This original KitchenAid part is found in all tilt head and some bowl lift mixers. The Attachment gear connects and drivers all attachments made for KitchenAid mixers. This gear will strip out when there is too much load on any attachments that are used. This gear is normally replaced with #9709627 Bevel Pinion and Center Gear.
Tools required for replacement:
• Flat head screwdriver
• Philips head screwdriver
• Hammer
• Punch
Mixer Attachment Hub Gear W11192794
OEM part for: KitchenAid, Whirlpool
Part Number: W11192794
$36.36
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.21 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Mixer Attachment Hub Gear will fit the following 496 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
KitchenAid
Whirlpool
Show More Compatible ModelsThis item works with the following types of products:
- Mixer Parts
This part replaces obsolete part #: WP9709627, WP9705130, D-115417-1, D-115418-1, 4169820, 9705130, 9705907, 9709627, 4159643, 9703907, 9703905, 4161405, 4161403
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Mixer Attachment Hub Gear
What would cause this part to become stripped and get broken teeth?
Lisa
for model number ksm150
asked on 2022-02-26
Hello Lisa, thank you for writing. It could be over tightening or maybe improper installation of the attachment itself. We hope this helps.
eReplacementParts Team February 26, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Under load during mixing the gears would skip and jump.
Walter - March 7, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Mixer
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Punches
1. Removed upper case half by punching out pins and taking out screws.
2. Removed all gears and replaced.
3. Greased all gears and put mixer back together.
Mixed up cookie dough for a test run. No more skipping.
2. Removed all gears and replaced.
3. Greased all gears and put mixer back together.
Mixed up cookie dough for a test run. No more skipping.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Accessory gears stripped
Darrell - September 30, 2018
Tool Type
Mixer
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Toothbrush, Q-tips and alcohol to clean old grease out.
Followed video, step by step.... very easy, paused video, performed step... resumed video. This video (repair KitchenAid mixer) was encouraging and gave me the confidence to complete more than satisfactory repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gears worn out
Ron - December 25, 2016
Tool Type
Mixer
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver
Took it apart per diagram. Easy to see the problem and where the parts go and how the went back together. Everything needed was on the website.
These folks are great to do business with.
These folks are great to do business with.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
