Safety Plug Kit 09905
Part Number: 09905
Order within the next 14 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 85141.
Product Information
Specifications
|
Description:
This is a genuine Presto replacement part, it is sold individually. The purpose of the 09905 Pressure Cooker Canner Sealing Ring/Overpressure Safety Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot. |
Frequently Purchased With
Compatibility
the 30 compatible machines
This part is compatible with the following machines:
Presto
01/CAA12H 12 Quart Pressure Canner
02/CAA12H 12 Quart Pressure Canner
01/C13 13 Quart Pressure Canner
0171001 13 Quart Pressure Canner
0171002 15 Quart Pressure Canner
0171003 15 Quart Pressure Canner
02/CAA16H 16 Quart Pressure Canner
01/C17 17 Quart Pressure Canner
0174001 17 Quart Pressure Canner
0175001 17 Quart Pressure Canner
0175002 17 Quart Pressure Canner
0175003 17 Quart Pressure Canner
0175004 17 Quart Pressure Canner
0175005 17 Quart Pressure Canner
0175006 17 Quart Pressure Canner
02/CAA12H 12 Quart Pressure Canner
01/C13 13 Quart Pressure Canner
0171001 13 Quart Pressure Canner
0171002 15 Quart Pressure Canner
0171003 15 Quart Pressure Canner
02/CAA16H 16 Quart Pressure Canner
01/C17 17 Quart Pressure Canner
0174001 17 Quart Pressure Canner
0175001 17 Quart Pressure Canner
0175002 17 Quart Pressure Canner
0175003 17 Quart Pressure Canner
0175004 17 Quart Pressure Canner
0175005 17 Quart Pressure Canner
0175006 17 Quart Pressure Canner
01/CAA20H 20 Quart Pressure Canner
02/CAA20H 20 Quart Pressure Canner
01/C22 22 Quart Pressure Canner
01/CG22 22 Quart Pressure Canner
0177001 22 Quart Pressure Canner
0178001 22 Quart Pressure Canner
0178002 22 Quart Pressure Canner
0178003 22 Quart Pressure Canner
0178004 22 Quart Pressure Canner
0178005 22 Quart Pressure Canner
0178006 22 Quart Pressure Canner
01750 Pressure Canner
01780 Pressure Canner
418 Pressure Cooker
55023 Pressure Cooker
02/CAA20H 20 Quart Pressure Canner
01/C22 22 Quart Pressure Canner
01/CG22 22 Quart Pressure Canner
0177001 22 Quart Pressure Canner
0178001 22 Quart Pressure Canner
0178002 22 Quart Pressure Canner
0178003 22 Quart Pressure Canner
0178004 22 Quart Pressure Canner
0178005 22 Quart Pressure Canner
0178006 22 Quart Pressure Canner
01750 Pressure Canner
01780 Pressure Canner
418 Pressure Cooker
55023 Pressure Cooker
Questions & Answers for Safety Plug Kit
I need replacement gasket, overpressure rubber plug and pressure regulator. Can you tell me which ones to buy.
Daphne
for model number 0175005
asked on 2022-03-24
Hello Daphane, thank you for writing. The gasket and overpressure plug kit is part 09905. The pressure regulator is part 09978. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team March 24, 2022
Will seal #09905 fit my 7 qt. pressure cooker? id is 13 inches
Russell
for model number 0175001
asked on 2022-07-15
Hello Russell, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 09905. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 15, 2022
Is there a phone number I can call to speak to someone?
Jeri
for model number 0178004
asked on 2022-07-04
Hello Jeri, Thank you for writing. Our customer service number is 877-346-4815. Customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 04, 2022
How do I order this as a first time customer?
Jeri
for model number 0178004
asked on 2022-07-04
Hello Jeri, Thank you for the question. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 04, 2022
Is the lid seal available?
Mark
for model number 7-8
asked on 2022-03-15
Hello Mark, Thank you for the question. According to the site, this seal is in stock and ready to ship. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team March 15, 2022
Will gasket #09905 fit canner #0178107?
Andy
for model number 0178107
asked on 2022-02-03
Hello Andy, thank you for writing. The correct part for your model is 09985. We hope this helps.
eReplacementParts Team February 03, 2022
Repair Instructions: Submitted by Customers Like You
8 of 8 people found this instruction helpful
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
Gasket seal leaking
Replaced gasket and seal. also got a instruction book for canner. Very simple repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 6 people found this instruction helpful
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Needed new seal ring and other old parts
Remove the old sealing ring from the lid and clean out the slot where the seal fits into. Insert the new sealing ring in the lid. The from the back of the lid, pop out the old pressure plug and press in the new one. Then simply install the new regulator and steam gauge.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Seal was old.
Removed the old one and installed the new part. Very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Seal Ring was old and had to be replaced
Just replaced the seal ring and the pressure regulator
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pressure canner needed new regulator and seaing ring
Take out the old parts, replaced the new ones.
Now pressure Canner does not leak and is sealed good and tight
Now pressure Canner does not leak and is sealed good and tight
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, None
Canner and pressure cooker had dried/old rubber parts
THESE WEREN'T FOR A RICE COOKER!!!!! They were for a pressure canner and a daily use pressure cooker!
Just remover hardened rubber parts and replaced. Then also replaced pressure gauge on canner and both got new gaskets. Very easy repairs. Bought extra rubber gaskets to have on hand because can't find them close to me. Just used screw driver and pliers. Parts were easily switched just had to make sure new pressure gauge was good and tight.
Just remover hardened rubber parts and replaced. Then also replaced pressure gauge on canner and both got new gaskets. Very easy repairs. Bought extra rubber gaskets to have on hand because can't find them close to me. Just used screw driver and pliers. Parts were easily switched just had to make sure new pressure gauge was good and tight.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
Pressure gage was old and not working properly
Read instructions in booklet that came with my pressure cooker canner. Removed the old pressure gage, installed the new one following the instructions in the booklet.
My pressure cooker canner needed repair. It was not a rice cooker.
Replaced the pressure gage with the new one according to the directions in the booklet.
Removed the old rubber gasket and replaced with the new gasket.
Remove and replaced the small rubber gasket in the top of the pressure cooker canner according to the instructions in the booklet that came with the canner.
Easy process. Thanks.
My pressure cooker canner needed repair. It was not a rice cooker.
Replaced the pressure gage with the new one according to the directions in the booklet.
Removed the old rubber gasket and replaced with the new gasket.
Remove and replaced the small rubber gasket in the top of the pressure cooker canner according to the instructions in the booklet that came with the canner.
Easy process. Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Water, dish soap, and cooking oil
Needed a new gasket so I can give my canner to my granddaughter, for she wants to learn how to can
After washing drying and a little oil on the gasket, slipped it around the lid and now it’s ready to use
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Pressure guage was missing, lid seal was wore out and the safety plugs needed replacing
Installed new lid seal, pressure guage and safety plugs. When new lid seal is replaced it makes it tough to close lid but that's a good thing, you have a good tight seal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools were used all and tighten to replace
Presto 17 qt pressure cooker has not been used for 30 years replaced all parts on lid ready to go and use
Removed each item and replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
51 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
48
4 stars
2
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Great art
I have two. Pressure canners from the 1970s that needed new rings or gaskets. I ordered and they arrived real fast and were a perfect fit and worked fantastic!! Thank you
Guest -
13 days ago
Verified Purchase
Very satisfied with my replacement parts
I have had my presto canner for about 20 years. I ordered all replacement parts just to have on hand in case in there was an issue.
Guest -
October 30, 2023
Verified Purchase
easy to get the right parts lots of information
just what I needed in great condition
Guest -
October 4, 2023
Verified Purchase
OEM Parts
So glad you are here! Great OEM parts selection, price and fast delivery!
Guest -
September 25, 2023
Verified Purchase
easy, quick delivery
always meets my needs for the correct part
Guest -
August 22, 2023
Verified Purchase
Easy repair very pleased with service
Worked great
Guest -
August 16, 2022
Verified Purchase
Replacement parts for ancient pressure canner
It was in great condition,good quality.
Even though they were temporarily out of stock, they arrived faster than expected. Replaced parts on my ancient pressure canner & am up & canning again!
Thank you!
Will recommend you to my canning groups!
Guest -
August 10, 2022
Verified Purchase
Easy replacement seal..
The seal went bad on my pressure canner after close to 30 years and the new one arrived faster than I even thought it would. I already canned chili the other day and with going into the canning season I'm thankful it came and worked great!
Guest -
July 5, 2022
Verified Purchase
Easy Replacement
Had to replace the sealing ring on my 1970’s presto canner. The fit was perfect and it no longer loses steam.
Guest -
June 6, 2022
Verified Purchase
Replacement gasket fit perfectly
This gasket fit great & held a good seal when brought up to heat.
Guest -
April 9, 2022
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information