Hand Vacuum Parts

SA FILTER BAG, OPP&MPP, GEN9, – Part Number: 90558113-01

$6.16

Manufacturer Part Number:: 90558113-01

This cloth filter is a genuine OEM replacement part designed for your blower vacuum. It has a wide plastic rim and a fine mesh screen, allowing air to pass through while preventing dirt and debris from entering and damaging the motor. When the filter becomes clogged, torn, or too dirty, it can lead to issues like motor damage and reduced suction power. It is recommended to replace the filter every...

STOP PIN

$14.81

Manufacturer Part Number:: A07344

No tools should be needed to replace the stop pin. This part is available individually and is an OEM from Porter Cable for use in hinge butt template kits. It attaches to the plate and the frame and is made of metal. If this part becomes broken it will need to be replaced.

FILTER GEN9.5 22 PLEATS NEW

★★★★★

(27)

$7.25

Manufacturer Part Number:: N600601

Works with Black & Decker hand held vacuums.

FILTER

★★★★★

(2)

$9.22

Manufacturer Part Number:: N593505

PRE-FILTER

★★★★★

(50)

$6.16

Manufacturer Part Number:: N924760

SA FILTER

★★★★★

(14)

$9.22

Manufacturer Part Number:: N566707

This is a genuine Black and Decker replacement part, it is sold individually. The 90552433-01 works in conjunction with the 90552388 Prefiter. It will collect the dust and debris that the Prefilter was not able to gather. Its purpose is to catch the dust and small debris from entering the motor and damaging it. Once this filter becomes dirty and clogged it should be discarded, and replaced with a new one.

CHARGER

★★★★★

(84)

$18.10

Manufacturer Part Number:: 90627870

This is a 120V two-pin wall charger compatible with various types of handheld vacuum cleaners. If your current charger is frayed, overheats during charging, or intermittently stops charging, it must be replaced immediately to avoid posing a safety hazard to you or your home. This charger is designed to charge your cleaner at 15V/150mA and is sold as an individual part without any additional parts ...

NAIL

★★★★★

(1)

$15.46

Manufacturer Part Number:: 800629

This is a Genuine Manufacturer Sourced replacement part used on Porter Cable Hinge Butt Template Kit. The Nail is the part that you would drive into the door. It is made out of Metal and it is Sold Individually. Replacing this part you may need Pliers.

FILTER SA

★★★★★

(39)

$6.16

Manufacturer Part Number:: N820985

This is a Genuine OEM Approved replacement part designed for use with Black and Decker Hand Vac. This Filter helps to keep the air clean. This part is made out of Plastic and it is Sold Individually. No tools are required to replace this Filter. You can simply remove the old filter from the unit and replace it with the new one.

FILTER BAG

★★★★★

(34)

$7.62

Manufacturer Part Number:: 90558113

This is a genuine Black and Decker replacement part, it is sold individually. The 90558113 filter bag is situated behind the 90558115 pre-filter to make sure dirt and debris do not get into the motor and damage it. It can be cleaned by blowing air through it. It is advisable to replace it when this is done a couple of times.

PRE-FILTER

★★★★★

(23)

$6.16

Manufacturer Part Number:: 90640311

This genuine OEM pre-filter in your vacuum is the first line of defense against larger debris and particles, preventing them from clogging the main filter and improving overall filtration efficiency. Positioned inside the dust bowl, you will know it is time for a replacement when the pre-filter appears visibly dirty or clogged, leading to reduced suction power and airflow. To remove the pre-filter...