Genuine Shindaiwa replacement part, this item is sold individually. The Eyelet is installed in the spool housing of the Trimmers shown below. Most of the Trimmers are dual line, so two Eyelets are required. The Eyelet creates a smooth surface for the cutting line to exit the spool.
Removed old housing.
Installed new housing in reverse order per removing old housing.
Worked perfectly since the ereplacement parts were exactly the same as the manufacters. I tried a less expense third party solution without success.
Took the carburetor of and notice that the cable had a bend on the original cable and the new one did not it had a little nub. Then I notice that the breather assembly was to big a the bottom fuel lines are small so I knew it was not going to fit. So I just put the carburetor back the way it was before I took it apart.
Removed old head from trimmer, drove out securing bolt with punch using plastic peen hammer. Drove securing bolt into new head, installed eyelets, installed Titanium String with old spool, attached new cover and screwed head back onto trimmer.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_12.gif "Part Location Diagram of 72005-92630 Shindaiwa Eyelet")
_WW_12.gif "Part Location Diagram of 72005-92630 Shindaiwa Eyelet")
