This is an authentic replacement part manufactured for use with DeWalt table saws and planers. The key fits the slot on the arbor shaft and into the keyway in the gear to allow the arbor and gear to rotate together. The key is sold as an individual replacement part, please note the gear and arbor are available separately.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
30 - 60 mins
(6 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
when I replaced original cutter head with a helix head, I did not notice the spacer behind the gear. I rechecked the video I reveiwed before I did this and their didnt show as well.
Remove side cover , remove chain, tensioner, and sprocket\' remove nut and belt\' then remove pulley. go back together in revierce order with new pulley.
Did you find this story helpful?
Thank you for voting!
My DW735 planer eats drive belts. They melt on the pulleys. I use my planer a lot but have replaced at least 5 belts this year.
I removed the main pulley and spent an hour soaking and scraping melted belt residue our of the little crevices and then the difficult task of installing a new belt. The little drive key vanished in the sawdust so I had to replace it. I have watched Youtube demos on replacing belts but there is no easy way. I salvaged the pulley so no
... Read morew have a spare.
There are many YouTube videos that will get you into the planer and have it apart. One thing I was interested in passing along to others though... Getting the belt off and back on again is a chore. I found using the socket wrench to turn the wheel as I was working the belt back on to be very helpful. It may help to use this method to work
... Read more the belt off of the wheel as well, but I only discovered this putting the belt back on. I also put a drop of CA on the key to hopefully make it less likely it will be lost again.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
