eReplacementParts is proud to be the Preferred Partner of dozens of leading equipment brands that build the gear you love. That means our inventory and availability are unmatched, and in some cases, we are the exclusive parts providers for these brands for their OEM parts programs.
Shimano Parts
We sell only genuine Shimano ® parts.
OR
Popular Shimano Parts
- Manufacturer Part Number:
- 10FFZ
This is an authentic replacement part which is supplied by the original manufacturer. The line guide pawl is designed for use with Shimano fishing reels. The purpose of this component is to interact with the line guide and the worm gear. It is an important part of the mechanism that guides the lines from the spool. You will require a screwdriver when replacing this item. It is advisable when remov...
- Manufacturer Part Number:
- 10BHU
This is an authentic manufacturer approved replacement part designed for use with Shimano Reels. The pawl cap is attached to line guide. It has internal threads that secure the part to the line guide. Simply screw the cap on using a flat-head screwdriver. This part is made out of plastic and it is sold individually.
- Manufacturer Part Number:
- 10896
This is an authentic item which is supplied by the original manufacturer for Shimano fishing reels. It is the special spacer that is utilized to provide a tight seal between the cast control mechanism components. Over time the material may wear out and begin to crack eventually requiring a replacement. Note, this item is made of a durable material and is sold as an individual component. Check the ...
- Manufacturer Part Number:
- 10TZF
It is an authentic OEM component which is made for use with Shimano fishing reels. This special spacer ensures a tight fit for the pawl cap. It provides a high-quality replacement for a missing or a damaged hardware that was installed on a new reel. Refer to the diagrams of your specific model for the exact location of this component. It is made of durable metal and is sold as an individual item. ...
- Manufacturer Part Number:
- 104VX
This is a Genuine OEM replacement part used on some Shimano Fishing Reels. This part is made out of Metal and it is Sold Individually. Sometimes if it sounds like the reel is grinding when you are retrieving line, general assumption is to think there is a major problem with the gears in reel. In reality usually the reel is fine and just the bearing is compromised.
- Manufacturer Part Number:
- 10FJP
This pawl cap houses the pawl mechanism in your drag reel or baitcast reel, so that the related components are secure and properly aligned. It actively engages with gear teeth to prevent backward movement of the reel handle and unintended line unwinding. It is situated near the point where the handle connects to the reel body, on the side opposite the handle. To decide if the pawl cap needs to be ...
- Manufacturer Part Number:
- 10BHQ
- Manufacturer Part Number:
- 10988
This click spring is sourced directly from the original equipment manufacturer for use with Shimano fishing reels. It is an important component that helps to apply tension on the click pin. This is a part of the click-drag mechanism that prevents the line from overextending under a heavy load. Over time it may wear out and lose tension eventually requiring a replacement. To ensure the correct inst...
- Manufacturer Part Number:
- 10FVD
The bail spring goes next to the bail spring guide A support. This item is made out of metal and is sold individually. This authentic item is supplied directly from the original equipment manufacturer for use with Shimano reels. During replacement, it may require a screwdriver to help install this part correctly. Over time this part may bend or break and will need to be replaced.
- Manufacturer Part Number:
- 109ZZ
This authentic component is an OEM part which is designed for Shimano fishing reels. It is an important part of the drag mechanism that applies tension on the line preventing it from reeling out too fast. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. One durable metal click pin is included. Check the diagrams of your model for the exact locat...
- Manufacturer Part Number:
- 10FJB
- Manufacturer Part Number:
- 10JC3
The rod clamp nut connects to the rod clamp. This is an original Shimano part for use in reels. Keep in mind this high-quality part is made of metal and is sold individually. During replacement, it may require a screwdriver to help install the nut correctly. This part may become broken and will need to be replaced.
Popular Shimano Models
-
Shimano CS400
-
Shimano CS300
-
Shimano TLD25
-
Shimano ULTCI45500XTC
-
Shimano OCEAJG2000NRHG
-
Shimano 3500 (1989)
-
Shimano CU200HGK
-
Shimano SLXDC150
-
Shimano CTE201DC
-
Shimano SA4000FG
-
Shimano STCI44000XGFB
-
Shimano SPM16II
-
Shimano CDF400A
-
Shimano METMGL150B
-
Shimano CORE50MG7
-
Shimano STC5000XGFK
All Shimano Product Types
-
Shimano Baitcast Reels Parts
-
Shimano Conventional Reels Parts
-
Shimano Fly Reels Parts
-
Shimano Spincast Reels Parts
-
Shimano Spinning Reels Parts
✖