OEM Shimano Conventional Reels Parts – eReplacementParts.com

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 109ZZ

This authentic component is an OEM part which is designed for Shimano fishing reels. It is an important part of the drag mechanism that applies tension on the line preventing it from reeling out too fast. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. One durable metal click pin is included. Check the diagrams of your model for the exact locat...

Shimano Pawl Cap

$6.16

Manufacturer Part Number:: 10BHT

This is an authentic manufacturer approved replacement part designed for use with Shimano Reels. The pawl cap is attached to line guide. This part is made out of plastic and it is sold individually. No tools are needed to complete this repair, simply snap it on.

Shimano Retainer Ring

★★★★★

(5)

$6.16

Manufacturer Part Number:: 105NK

This hardware is an authentic OEM part which is designed for use with Shimano fishing reels. It helps to secure the bearing. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality E lock is made of durable metal and is sold individually. Make sure to check the appropriate diagrams of your model for the exact location and...

Cast Control Spacer – Part Number: 10896

Shimano Cast Control Spacer

★★★★★

(2)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 10896

This is an authentic item which is supplied by the original manufacturer for Shimano fishing reels. It is the special spacer that is utilized to provide a tight seal between the cast control mechanism components. Over time the material may wear out and begin to crack eventually requiring a replacement. Note, this item is made of a durable material and is sold as an individual component. Check the ...

Spool Tension Spacer (a) – Part Number: 1085F

Shimano Spool Tension Spacer (a)

★★★★★

(2)

$5.95

Manufacturer Part Number:: 1085F

It is an authentic OEM item which is designed for Shimano fishing reels. This is a special spacer that is utilized to apply tension on the spool. If the washer is worn it may result in a backlash and the line overextending under a heavy load. Over time due to friction it may wear out or get damaged otherwise, eventually requiring a replacement. Make sure to check the diagram of your specific model...

Shimano Line Guide Pawl

★★★★★

(15)

$6.16

Manufacturer Part Number:: 10FFZ

This is an authentic replacement part which is supplied by the original manufacturer. The line guide pawl is designed for use with Shimano fishing reels. The purpose of this component is to interact with the line guide and the worm gear. It is an important part of the mechanism that guides the lines from the spool. You will require a screwdriver when replacing this item. It is advisable when remov...

Shimano Click Pin

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 10MFC

Shimano Line Guide Pawl

★★★★★

(2)

$6.16

Manufacturer Part Number:: 10BHQ

Shimano Pawl Cap

★★★★★

(3)

$7.39

Manufacturer Part Number:: 10FJP

This pawl cap houses the pawl mechanism in your drag reel or baitcast reel, so that the related components are secure and properly aligned. It actively engages with gear teeth to prevent backward movement of the reel handle and unintended line unwinding. It is situated near the point where the handle connects to the reel body, on the side opposite the handle. To decide if the pawl cap needs to be ...

Shimano Click Spring

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 10HZ5

Shimano Line Guide Pawl

★★★★★

(1)

$6.16

Manufacturer Part Number:: 10FJ9

This is a Genuine Manufacturer Sourced replacement part used on some Shimano Fishing Reels. This part is made out of Metal and it is Sold Individually. If Line guide (level wind) will not travel when cranking, replacing Line Guide Pawl may resolve the issue.

Shimano Click Spring

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 10K07

This part is available as an individual replacement. The click spring attaches to the pre-program dial and is made of metal. When replacing this item a screwdriver and a set of pliers may be needed. It is a very small spring and will need to be replaced if it becomes lost or broken. This is an authentic Shimano replacement part that is sourced from the original manufacturer for use with reels.

Shimano Conventional Reels Parts

Top Shimano Conventional Reels Models

Popular Shimano Conventional Reels Parts

Shimano Conventional Reels Models

Shimano Conventional Reels Parts

Search By Model or Part Number

Top Shimano Conventional Reels Models

Popular Shimano Conventional Reels Parts

Shimano Conventional Reels Models