This is a genuine Milwaukee replacement part, It is sold individually. This part controls the random orbit functions of of the Milwaukee sander it is used on. If this part breaks or gets worn, the sander will operate poorly and the pad will rotate at a high rate of speed.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
worked as expected
I've ordered parts from you many times over the years. They always were the exact ones I needed and arrived quickly.
Dan - August 24, 2019
Verified Purchase
★★★★★
★★★★★
great web page
Brake pad and bearing for orbital sander. Fast delivery, easy install, and works perfect. Thanks for a great web page
Guest - October 9, 2019
Verified Purchase
★★★★★
★★★★★
Perfect
Arrived earlier than stated. Part fit perfectly. Would definitely buy from them again.
Guest - January 4, 2020
Verified Purchase
★★★★★
★★★★★
easy fix, fit perfectly.
sander is working great.
Guest - March 31, 2020
Verified Purchase
★★★★★
★★★★★
good site to clearlyt find the part you need
I've used this site many times to find the part I need. I quickly found the part I needed here and received it in just a few days. Great site to get parts and the information from other users.
Michael - April 20, 2020
Verified Purchase
★★★★★
★★★★★
Fast delivery
First time using this place. I had trouble with my Milwaukee sander spinning too fast. Some of the other reviews pointed to the pad brake. I order a few, arrived early in 3 days, an it worked great. Factory parts.
Guest - February 8, 2021
Verified Purchase
★★★★★
★★★★★
Great pad brake
I thought this part had something to do with the sanding dust. I had no idea it was a pad break until the one on my sander fell apart. I ordered the part by looking at a picture and found out it was a break for the orbital disk. The part came in a few days and was easy to install it works great! This is a great company to order parts from!
Guest - June 21, 2021
Verified Purchase
★★★★★
★★★★★
Exelent
Perfect
Iglobal - October 2, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair
Shipped as stated and fit as expected.
Guest - December 23, 2021
Verified Purchase
★★★★★
★★★★★
Product
Arrived promptly and was the correct product
Anonymous - June 14, 2022
Verified Purchase
< Prev
1
2
Next >
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
Less than 15 mins
(11 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
My random orbital sander was running full bore, no randomizing.
Remove the pad. Remove the bearing/pad mounting bracket. There is a screw with a collar that hold the bearing against the drive spindle. Also use a small flat top screw driver through one of the vent holes in between the fins of the suction to keep the spindle from turning so that you can remove the hold down screw. Place the bearing plat
... Read moree on two small pieces of wood with the center open, take a socket that will fit in the center hole and cover most of the exposed bearing. Using a hammer, drive the old bearing out. Insert the new bearing in the recessed location, using the hammer tap around the plate to seat the bearing flush with the mounting plate. It has to be flush or the pad won\'t align properly. The rest kind of depends on the make and model of your sander.
I removed the bottom sanding disc 4 screws. Removed the plastic housing around the sanding disc 6-8 screws. took out the old brake, slid the new brake in. Replaced all the screws.
Did you find this story helpful?
Thank you for voting!
The brake pad of my Milwaukee 5GÇ¥ ROS had worn out, to the point that if was falling apart.
After removing the sanding pad by removing the four Torx screws in the bottom plate and removing them and the pad.
I then removed what was left of the original brake pad and positioned the new pad in place. It easily fit into the slots, with the exception of the last two, or three.
They required a little coaxing with the b
... Read morelade of a #1 slotted screwdriver.
I then replaced the sanding pad and secured the four screws.
Holy cow! What a difference the new brake pad made! No more over speeding of the disk when itGÇÖs removed from the work surface, and the disk stops spinning much faster when turning the sander off.
The part cost was very reasonable and the shipping was very fast.
Removed pad and side panel of body case, removed old brake and replaced. Very easy repair if you have the right size torx screwdriver. Also replaced dust bag and o-ring.
Did you find this story helpful?
Thank you for voting!
The pad brake on my orbital sander disintegrated. I didn\'t know what the part was, but the parts diagram here showed me what I needed.
I\'m a newbie at diy repair of tools but this one was very straightforward: took off the velcro sanding pad (4 phillips screws in my Milwaukee orbital sander. Then I saw that I needed to take a few more out so that I could fit the pad brake in place (torx screws). The longest part of the repair was removing the gunk that had built up i
... Read moren the holes for those 3 screws. Then I put the brake in place, making sure it fit properly into the slots, screwed everything back together and got back to sanding. It was probably 5 minutes of digging junk out and 2-3 minutes putting it back together.
Read less
Did you find this story helpful?
Thank you for voting!
Sander wound\"nt sand properly & acted like it had a counter balance effect
Replaced the pad break, as the raised flanges were worn down flat. completed the repair by replacing the dust bag, locking ring & compression spring. Rebuilt to be new again!
The replacement pad price was good, delivery prompt.
The old pad was removed with a screwdriver and the new one replaced.
I replaced the brake since I ordered it without knowing the old one was OK.
Part of the housing had to be removed to install the brake.
Sander works like new again.
Did you find this story helpful?
Thank you for voting!
Excessive speed, and poor quality of the finished wood.rem
Removed pad. Removed 4 screws. Peeled off old brake. Pressed tabs from new brake into base.(That\'s the hard part.) Milwaukee and Craftsman are the same procedure. DeWalt is way easier and pad brakes last way longer. Haven\'t had to replace one on the Bosch yet after two years. Replaced pad screws.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10131172
Manufacturer Part Number: 44-52-0965
Orbital or Palm Sander
- 5" Random Orbit Palm Sander
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/power-tool/sander-polisher/transmissions-and-clutches/"},{"position":2,"name":"44-52-0965","title":"44-52-0965","url":""}]
_WW.gif "Part Location Diagram of 44-52-0965 Milwaukee Pad Brake")
_WW.gif "Part Location Diagram of 44-52-0965 Milwaukee Pad Brake")
