Part Location Diagram of 51-36-7100 Milwaukee Hook And Loop Sander Pad
See part 40 in the diagram
( Grid squares measure 1x1 inch )

Hook And Loop Sander Pad 51-36-7100

Manufactured by:
Milwaukee
ERP Number:
ERP11878741
Part Number:
51-36-7100
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(48 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Genuine Milwaukee replacement part. Includes one Pad. This Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper) Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad. When a pad needs to be replaced, simply remove the four screws that hold the pad to the sander, then replace it with a new pad. • Standard hook and loop pad for use with 5" discs. • It has 8 dust collection holes which works in conjunction with the dust bag to keep you work surface free of debris.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Orbital or Palm Sander
  • Sander Polisher
Part# 51-36-7100 replaces these:
51-36-7095,

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(48 Reviews)
Click to filter by ratings:
  • 5 stars
    43
  • 4 stars
    2
  • 3 stars
    1
  • 2 stars
    1
  • 1 star
    1
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(48 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Sander pad would no longer hold sandpaper

Dennis from Lakewood, California

18 of 18 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
Remove the four screws, remove the old pad and replace with the new pad with the four screws.
Did you find this story helpful?
Thank you for voting!

The backing for the sanding paper fell apart.

THOMAS from MIAMI, Florida

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
Replaced the pad.
Did you find this story helpful?
Thank you for voting!

Sander pad was damaged

Russell from Theriot, Louisiana

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
Removed 4 screws then removed sander pad. Replaced sander pad & replaced 4 screws.
Did you find this story helpful?
Thank you for voting!

The old pad wouldn\'t hold disks.

Ron from Alberton, Montana

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
1. Remove old pad, 4 screws.
2. Install new pad, 4 screws, easy.
3. New pad is excellent, just like new.
Did you find this story helpful?
Thank you for voting!

Loops wore out

Bill from Oceanside, California

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
Removed the old pad and installed the new one
Did you find this story helpful?
Thank you for voting!

Original pad was worn out

jack from Belton, Texas

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
Removed 4 screws and the old pad and installed new pad.
Did you find this story helpful?
Thank you for voting!

Sander pad was coming apart

David from Newark, Delaware

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
51-36-7100
Removed 4 torx screws to remove the old pad. Installed the new pad with the 4 screws
Did you find this story helpful?
Thank you for voting!

The original pad on the sander was in bad shape--very uneven and would not hold the sandpaper

charles from Fishers, Indiana

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
Remove four screws from old pad
Remove old pad
Replace with new pad
Install four screws for new pad
Use the sander
Did you find this story helpful?
Thank you for voting!

Replaced worn out sanding pad.

Ronald from Kapaa, Hawaii

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
1. Remove 4 screws hold old pad to sander with appropriate screwdriver tool (May be a screw Philips, star, or other bit tip).
2. Attach new pad with same screws.
Did you find this story helpful?
Thank you for voting!

Loops in sanding pad wore out

Bryan from Salem, Oregon

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
51-36-7100
Removed old part and replaced with new part which fit perfectly... 4 screws:)
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP11878741
Manufacturer Part Number: 51-36-7100
Brand Model Number Description
Milwaukee 2648-20 Orbital or Palm Sander - M18 Random Orbit Sander
Milwaukee 6021-21 Orbital or Palm Sander - 5" Random Orbit Palm Sander
Milwaukee 6034-21 Orbital or Palm Sander - 5" Random Orbit Sander