Orbital or Palm Sander Parts
We sell only genuine OEM parts.
OR
Popular Orbital or Palm Sander Brands
See All
Popular Orbital or Palm Sander Parts
- Manufacturer Part Number:
- 300527002
It is a genuine OEM sourced 5-inch sanding pad assembly that is specially designed for use with Craftsman orbital sanders. Its purpose is to provide support for hook and loop sandpaper, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. To make the pad last longer do not put to much pressure on the sander when using it, the pressure will create heat and rui...
- Manufacturer Part Number:
- 51-36-7100
Genuine Milwaukee replacement part. Includes one Pad. This Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper) Applying too much pressure on the sander may cause premature wear on the Hook and Loop...
- Manufacturer Part Number:
- N430442
This authentic OEM belt is specially designed for use in sanders. It is a looped, flexible strip made of rubber that is responsible for controlling the movement of the sanding pad. Over time, the belt can wear out, lose elasticity, or break due to regular use or improper installation. When the belt fails, the sanding pad will become unstable and may stop spinning altogether or exhibit erratic move...
- Manufacturer Part Number:
- 44-86-1380
This is an authentic OEM part which is designed for use with Milwaukee tools. It is a special hardware which helps to secure components. This is an identical replacement for a damaged or a faulty part that was installed on a new unit. Check the appropriate diagrams for your model for the exact location and the correct installation of this retaining ring. You will need snap-ring pliers to remove th...
- Manufacturer Part Number:
- N097696
Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the mos...
- Manufacturer Part Number:
- 151284-00SV
This sander pad is a genuine Dewalt replacement part, not generic or aftermarket. It it a Foam Rubber type pad and is compatible with clamp-on style sandpaper. It is not compatible with hook-and loop sandpaper. This sander pad has a metal backing plate with a padded sanding surface attached. The pad is complete and ready to install. This sander pad will fit the Dewalt sanders listed in the 'Compa...
- Manufacturer Part Number:
- 445861-25
(Sold Individually)
This motor brush is for grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the grinder before installing this part. Wear work gloves to protect your hands.
- Manufacturer Part Number:
- N329079
This genuine OEM pad assembly—also known as a hook-and-loop sanding pad or sanding disc—is designed for use with compatible sanders and sourced directly from the original manufacturer. The circular pad measures 4.75 inches in diameter, features 8 dust extraction holes, and includes a Velcro backing to securely hold sandpaper discs in place during operation.
Mounted to the base of the sander, th...
- Manufacturer Part Number:
- N918736
This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
- Manufacturer Part Number:
- 3604460555
This cord is a genuine OEM replacement part and is sold individually. Power Cord Specifications: 2 Wires. 18 Gauge. 2 Prongs. 6-1/2 Feet Long. It is constructed with thick insulation for long service life and a strong two-prong plug. This cord is compatible with the tools listed below. It can work for other applications and for other tools as well, but compatibility is not guaranteed. Installati...
- Manufacturer Part Number:
- 151281-08
The 151281-08 Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes.
Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper)
Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad.
When a pad needs to be replaced, simpl...
- Manufacturer Part Number:
- N373679
This pad assembly (PSA), commonly referred to as a sanding disc, is an original manufacturer part used in orbital sanders. It has four attachment points and a diameter of 5 inches. It features a Velcro backing on one side which allows it to securely hold the sandpaper in place during operation for efficient smoothing of surfaces. If the pad breaks, becomes dislodged, or is unable to hold the sandp...
Popular Orbital or Palm Sander Models
-
DeWALT DWE6421 (Type 1)
-
DeWALT DWE6423K (Type 1)
-
DeWALT DWE6423R (Type 1)
-
Bosch ROS20VS (3601C87511)
-
Porter Cable 382 (Type 2)
-
Craftsman CMEW231 (Type 1)
-
DeWALT DCW210B (Type 2)
-
DeWALT DCW210B (Type 1)
-
Bosch 3727DEVS (0601372639)
-
Bosch 1295DVS (0601295739)
-
Bosch 1295DVS (0601295756)
-
Bosch 3107DVS (0603310639)
-
Bosch 3107DVS (0603310739)
-
DeWALT DWE6420 (Type 1)
-
Bosch 3725DVS (0601372539)
-
Bosch 1297D (0601297039)
.png)
All Orbital or Palm Sander Brands
-
Black and Decker Orbital or Palm Sander Parts
-
Dynabrade Orbital or Palm Sander Parts
-
Milwaukee Orbital or Palm Sander Parts
-
Ryobi Orbital or Palm Sander Parts