Part Location Diagram of N430442 DeWALT Belt
See part 14 in the diagram
( Grid squares measure 1x1 inch )

Belt N430442

Manufactured by:
DeWALT
ERP Number:
ERP12529381
Part Number:
N430442
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This authentic OEM belt is specially designed for use in sanders. It is a looped, flexible strip made of rubber that is responsible for controlling the movement of the sanding pad. Over time, the belt can wear out, lose elasticity, or break due to regular use or improper installation. When the belt fails, the sanding pad will become unstable and may stop spinning altogether or exhibit erratic movement, resulting in inefficient and inconsistent sanding. To begin the repair, first, unplug the sander and remove the fasteners that secure the housing cover. Locate the old belt and note how it is routed before removing it from the sander. Position the new belt in the sander and ensure that it is aligned and adequately tensioned. Reattach the housing cover and secure it with the appropriate screws.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Craftsman
This part works with the following products:
  • Orbital or Palm Sander

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(9 Reviews)
Click to filter by ratings:
  • 5 stars
    9
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Foam pad had dryrot from heat

Ronald from Oldtown , Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
N329079, N430442
Replaced belt and pad with screwdriver
Did you find this story helpful?
Thank you for voting!

Sander pad fell apart

BRIAN from LA PORTE, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
N329079, N430442
Unscrewed pad with torx bit.
Removed pad & belt from sander.
Cleaned underside of sander & parts that belt went around. Placed new belt around where old belt had been removed from. Placed new pad and tightened torx screws. DONE!
Old parts came off. New parts went back on... simple!
Did you find this story helpful?
Thank you for voting!

part was broken

gordon from las vegas, Nevada

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
N430442
1. Took off broke part
2. Put on unbroke part
Did you find this story helpful?
Thank you for voting!

Drive belt broke

Harry from Clarkesville, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
N430442
Took off the pad, replaced the belt, and replaced the pad.
Did you find this story helpful?
Thank you for voting!

Random orbital sander belt broke

Robert from LANESVILLE, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
N430442
Removed sanding pad, removed broken belt and replaced with new drive belt.
Did you find this story helpful?
Thank you for voting!

belt broke

John from Lott, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
N430442
replaced it
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12529381
Manufacturer Part Number: N430442
Brand Model Number Description
Craftsman CMEW231 Orbital or Palm Sander - 5in Random Orbit San
DeWALT DCW210B Orbital or Palm Sander - Random Orbit Sander
DeWALT DCW210B-B3 Orbital or Palm Sander - Random Orbit Sander
DeWALT DCW210BR Orbital or Palm Sander - Random Orbital Sander
DeWALT DCW210D1 Orbital or Palm Sander - Random Orbit Sander
DeWALT DCW210D1R Orbital or Palm Sander - Random Orbital Sander
DeWALT DCW210D2-B3 Orbital or Palm Sander - Random Orbit Sander
DeWALT DCW210D2-BR Orbital or Palm Sander - Random Orbit Sander
DeWALT DCW210P1 Orbital or Palm Sander - Random Orbit Sander
DeWALT DWE6420 Orbital or Palm Sander - 5in Random Orb Sndr
DeWALT DWE6420R Sander Grinder - Random Orbital Sander
DeWALT DWE6421 Orbital or Palm Sander - 5in Random Orb Sndr
DeWALT DWE6421-AR Orbital or Palm Sander - 5 In Random Orbit Palm Sa
DeWALT DWE6421-B2 Orbital or Palm Sander - 5 In Random Orbit Palm Sa
DeWALT DWE6421-B3 Orbital or Palm Sander - 5 In Random Orbit Palm Sa
DeWALT DWE6421-BR Orbital or Palm Sander - 5 In Random Orbit Palm Sa
DeWALT DWE6421K Orbital or Palm Sander - 5in Random Orb Sndr
DeWALT DWE6423K Orbital or Palm Sander - Random Orbital Sander
DeWALT DWE6423R Orbital or Palm Sander - Random Orbital Sander