Part Location Diagram of 606640-00 DeWALT O-ring
See part 74 in the diagram
( Grid squares measure 1x1 inch )

O-ring 606640-00

Manufactured by:
DeWALT
ERP Number:
ERP10181075
Part Number:
606640-00
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(13 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. Of the many causes for O-Ring failure, the most common among power tools are: • <u>Extrusion and Nibbling</u> • O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • <u>Abrasion</u> • One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • <u>Over Compression </u> • O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • <u>Heat Hardening</u> • O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • <u>Weather/Ozone Cracking</u> • O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • DeWALT
This part works with the following products:
  • Nailer

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(13 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Gun stopped working. Took it apart, noticed many O-rings got over heated and stretched or ripped

David from Roanoke, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Replaced stretched O-rings (from heat), Replaced Trigger Valve (from heat and dirt), Cleaned dirty oil and metal fragments out of the inside of gun. Works as brand new. Make sure to check all O rings. If any are out of place, pinched, or stretched, it will stop your gun from working.
Did you find this story helpful?
Thank you for voting!

leaked air

james from smyrna, Tennessee

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
606640-00
removed trigger valve and replaced with new one and replaced all the o\'rings except one the new o\'ring i ordered was to small re used the old one.
Did you find this story helpful?
Thank you for voting!

o-rings

Jim from Jamesburg , New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
612096-00, 608611-00, 606640-00
Took it apart cleaned it put it back together
Did you find this story helpful?
Thank you for voting!

nail gun leaking air

Richard from San Diego, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Parts Used:
612096-00, 606640-00, 390156-00
replaced the bad O rings and saved $200
Did you find this story helpful?
Thank you for voting!

Would not hold air pressure

Duane from Barron, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Watched YouTube video of a guy repairing the same nail gun. Took it apart and replaced o rings from a kit I ordered online, made for my nai
Gun.
Did you find this story helpful?
Thank you for voting!

Nailer was leakkng air & wouldn\'t fire.

Michael from Coffeyville, Kansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Took it apart, cleaned it up. Replaced all the o-rings & seals. Pretty simple repair. The parts diagram on your website was perfect. Helped me order the correct parts.
Did you find this story helpful?
Thank you for voting!

Air leaking from the trigger and the tip.

Jeff from CHESTERFIELD, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
612096-00, 606640-00
Disassembled the framing nailer and installed O-rings. Reassembled and tested.
Did you find this story helpful?
Thank you for voting!

Nailer would not fire. Was leaking air in multiple places

Ron from GREER, Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
612096-00, 608611-00, 606640-00
Nailer was leaking air and would not fire. I first removed the back cover and replaced all of the clear (yellow) o rings which were deteriorated and put it all back together. Was still leaking air around d trigger. I ordered a new trigger assembly and replaced it. Works great now
Did you find this story helpful?
Thank you for voting!

Blown o-ring 2 of them

larry from torrance, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
612096-00, 606640-00
You Tube was a big help and the diagram that ereplacement parts offers on it\'s web site was a big help,so thank you ereplacementparts.com
Did you find this story helpful?
Thank you for voting!

Leaking air from nose of nailer

Gerald from Bellingham, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
612096-00, 606640-00, 390164-00
Removed deteriorated rings easily replaced. Had bought another nailer from pawn shop for parts but fixed that one also-same problem!
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2