This is a Genuine Manufacturer Approved replacement washer used on lawn and garden equipment. This part is made out of Metal and is Sold Individually. Washer helps to distribute the pressure evenly over the surface and provides a solid grip.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
This washer is as it says....HARD!
There are many imposters, but this here hardened washer is the OG of washers. Don't pay the top dollar from Husqvarna for an imitation washer that's not even close this this guy! Treat yourself to something you deserve! Buy this washer for you, your wife, and even Larry down the street! You'll be the talk of the whole neighborhood.
Guest - August 27, 2019
Verified Purchase
★★★★★
★★★★★
Worked great
.
Guest - September 5, 2019
Verified Purchase
★★★★★
★★★★★
Exactly what I wanted
Just wish I’d asked for, just wish I’d selected faster delivery!
Guest - November 12, 2019
Verified Purchase
★★★★★
★★★★★
Mower parts
Shipped fast but the shipper must have had problems because delivery took 12 days. Maybe a combination of post holiday congestion and/or weather? Part was what I needed, though. Thanks.
Guest - January 7, 2020
Verified Purchase
★★★★★
★★★★★
Mower part
Shipping was fast. Great price
Guest - May 16, 2019
Verified Purchase
★★★★★
★★★★★
Great response time!
Always love the quickness that the parts arrive. They're always the right parts & fit perfectly.
Guest - August 18, 2022
Verified Purchase
★★★★★
★★★★★
This was the part that I needed.
It came packaged properly, but it seemed the company took a couple of extra days to drop it in the mail. The distance from their location (south of Salt Lake City) to my home (north of Salt Lake City) is probably about 35 miles. Unfortunately, the product went from their site to Boise, Idaho, before coming back to Utah to my location. Not their fault I guess because they don't control the shipper, but I don't understand the efficiencies of traveling several hundred miles to deliver a washer 35 miles away.
Guest - August 7, 2019
Verified Purchase
★★★★★
★★★★★
Slowww delivery
All I needed was one small part. Waited a month. Took 15 minutes to put it on, and fix it.
Guest - July 21, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I took the front wheel off after receiving the parts. The bad bearing had to be pounded out from the wheel housing using a chisel and hammer. This was done carefully so as to not scar the inside of the wheel housing. A shot of WD-40 helped release the bearing along with the gentle hammering. The new bearing was inserted and pressed
... Read moreinto place using the hammer and wood block. Once the bearing was in, I lubricated the inside of the wheel housing with a standard grease gun using the wheel grease fitting. I was then able to slip the wheel on the shaft and place the two appropriate washers on the shaft and complete the job with the placement of the locking clip.
I removed the axle cap the the e-clip and washer. pull the wheel off. The installed the new bearing. and the washers behind the wheel. I put some lube on the axle. Slipped the wheel back on, put the washer and e-clip back on the axle, then the axle cap. Done
1. Didn\'t know exactly how to match parts, so I jacked the front of the mower up and braced on blocks with both wheels off ground; took off the left front wheel to find which parts were needed. Searched for parts on the web and ereplacements had the parts and with pictures. This was a great help to know I was getting the right parts. Al
... Read moreso, the tutorials of others who had had replaced the same parts was a big help.
2. Cleaned the axle shaft and left front wheel parts, regreased all pieces and put back together.
3.Did the same with the right wheel using new parts.
Not a hard job.This is an old mower passed down from others. Did not realize how much the front axle and parts were in need of greasing.
Replaced left front wheel retention assembly which fell off during mowing operation. Created a plastic washer and clevis pin assy. to hold wheel on until parts arrived. Ordered parts delivered within 4 days including Columbus Holiday..
1. Check for required parts.
2. Gathered required tools. (Pump jack, needle nose pliers, whe
... Read moreel chocks, grease, rag for cleaning)
3. Set brake, chocked wheels and set jack in place.
4. Jacked up left wheel, , greased axle then put new parts in place. Note: Pliers were not needed with finger pressure was able to push Ring Clip into to groove. Done.
1. Took what was left of the old wheel off
2. Swapped tire to new wheel
3. Reassemble wheel on the axle
4. Mowed yard
5. Watched Harvey flood everything that I own but the yard looked good going under water.
6. Time for a new mower this one is 2 feet under water
1. Remove transaxle
2. Install transaxle
3. Remove wheel hubs from old transaxle
4 install and align wheel hubs w slot on transaxle
5. Add drop of oil in slot to allow key to slide into place
6. Lightly tap key into place using a flat head chisel
7. Tap key pass clip washer slot
8. Add washer an
... Read mored clip to secure
9. Do same on other hub wheel
10. Install tires and ride
Jacked up the front end of mower.
Removed hubcap
Pried ring clip off
Removed washers and wheel, as well as inside washer
Removed spindle cap
Removed ring clip
Removed spindle
Pried out the two plastic bushings in the spindle tube and replaced with two purchased locally (did not show these o
... Read moren the parts diagram that cam with the mower.)
Replaced parts in reverse from above.
Installed two new wheel/tire assemblies purchased for 1/2 the price ereplacement parts wanted for two wheels (no tires); purchased from another dealer.
Jacked the mower up and removed the tires and then the right and the left spindle assembly. Went to ereplacement and used the exploded view to order the parts. When the parts arrived I drew a rough sketch of the spindles and showed where the parts were to be installed and numbered each package with the corresponding number and install the
... Read more parts. Numbering the packs and not opening them when necessary.
Read less
Did you find this story helpful?
Thank you for voting!
Right front wheel assembly issues; wheel wobbled, too much torque on retaining clip and eventually broke
1. tried using more washers to reduce space on the axle for the wheel to move.
2. this did not work and will now have to order additional axle components the repair
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9015920
Manufacturer Part Number: 532188967
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(2008-01)_WW_3.gif "Part Location Diagram of 532188967 Husqvarna Lawn Mower Hardened Washer")
_(2008-01)_WW_3.gif "Part Location Diagram of 532188967 Husqvarna Lawn Mower Hardened Washer")
