A genuine OEM part sourced directly from the manufacturer, this part is sold individually. Washers help to spread the load, and prevent damage to the surface being fixed, or provide some sort of insulation such as electrical. Washers can also be important for preventing galvanic corrosion. This part is compatible with the various mowers that are listed below.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great place to get parts
So far all the parts I've purchased fit and work perfectly. Best place I've found for parts.
Richard - February 26, 2020
Verified Purchase
★★★★★
★★★★★
Professional repairs support from professional Providers!
Parts in condition expected. Haven't used to date but expect no problems.
Guest - April 13, 2020
Verified Purchase
★★★★★
★★★★★
Received quickly and worked like a charm!
In the midst of a pandemic, the site advised that it could take longer than normal to receive parts. However, they came in quickly and were exactly what I needed. I also appreciated the link in the emailed receipt with instructions on how to do the repair myself!
Jenni - May 26, 2020
Verified Purchase
★★★★★
★★★★★
Great product
Perfect fit
Guest - December 9, 2020
Verified Purchase
★★★★★
★★★★★
Mower repairs
Have ordered several times. Had a problem with first part. It was handled quickly and courteously so we came back for more. Great service.
Michele - June 15, 2021
Verified Purchase
★★★★★
★★★★★
The washers and clip for my wheel needed replaced
Great condition individually wrapped
Guest - July 5, 2021
Verified Purchase
★★★★★
★★★★★
Exactly what we needed
Exactly what was needed
Guest - July 20, 2021
Verified Purchase
★★★★★
★★★★★
Worked as expected
Everything arrived quickly and correctly, easy repair.
Guest - May 13, 2022
Verified Purchase
★★★★★
★★★★★
Correct part
Order was processed quickly. Hard to get parts at other vendor were availble and shipped promptly
Guest - May 16, 2023
Verified Purchase
★★★★★
★★★★★
easy repair works like original part
fit perfect easy replacement
Guest - January 24, 2025
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I took the front wheel off after receiving the parts. The bad bearing had to be pounded out from the wheel housing using a chisel and hammer. This was done carefully so as to not scar the inside of the wheel housing. A shot of WD-40 helped release the bearing along with the gentle hammering. The new bearing was inserted and pressed
... Read moreinto place using the hammer and wood block. Once the bearing was in, I lubricated the inside of the wheel housing with a standard grease gun using the wheel grease fitting. I was then able to slip the wheel on the shaft and place the two appropriate washers on the shaft and complete the job with the placement of the locking clip.
I removed the axle cap the the e-clip and washer. pull the wheel off. The installed the new bearing. and the washers behind the wheel. I put some lube on the axle. Slipped the wheel back on, put the washer and e-clip back on the axle, then the axle cap. Done
Replaced left front wheel retention assembly which fell off during mowing operation. Created a plastic washer and clevis pin assy. to hold wheel on until parts arrived. Ordered parts delivered within 4 days including Columbus Holiday..
1. Check for required parts.
2. Gathered required tools. (Pump jack, needle nose pliers, whe
... Read moreel chocks, grease, rag for cleaning)
3. Set brake, chocked wheels and set jack in place.
4. Jacked up left wheel, , greased axle then put new parts in place. Note: Pliers were not needed with finger pressure was able to push Ring Clip into to groove. Done.
1. Removed steering wheel cap removed bolt and washer
2. Removed bolts on gear sector plate.
3. Removed tie rods from gear sector plate
4. Removed bolts from bushing
5. Removed steering shaft
6. Installed steering shaft
7. Installed bushing, and gear and Gear sector plate and retainer spring
8. Re
... Read moreplaced new bolts and washers
9. Installed new washer and nut
10. Replaced steering cap, completed job
1. Took what was left of the old wheel off
2. Swapped tire to new wheel
3. Reassemble wheel on the axle
4. Mowed yard
5. Watched Harvey flood everything that I own but the yard looked good going under water.
6. Time for a new mower this one is 2 feet under water
Jacked up the front end of mower.
Removed hubcap
Pried ring clip off
Removed washers and wheel, as well as inside washer
Removed spindle cap
Removed ring clip
Removed spindle
Pried out the two plastic bushings in the spindle tube and replaced with two purchased locally (did not show these o
... Read moren the parts diagram that cam with the mower.)
Replaced parts in reverse from above.
Installed two new wheel/tire assemblies purchased for 1/2 the price ereplacement parts wanted for two wheels (no tires); purchased from another dealer.
I drove the old bearings out with a drift pin, pounded the new ones using an appropriately sized socket, greased it and installed the outer washer and clip. Easy
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
