This is a high quality replacement hardware that is specially manufactured for use on Toro lawn and garden equipment. Two of these screws are generally used to secure the belt guide to the mower deck. Please note this durable metal hex head taptite screw is included per order.
Remove old axle assy. remove and install rear wheels on the correct side being sure to take a picture of the order of washers and thrust washers. You have to be sure to get the slip parts in the wheels on the right side. The biggest problem I encountered was a bolt broke on the belt guide. This is also one of the bolts securing the engine
... Read more to the frame.Tried several eze-outs and managed to break a couple. Finally went ahead and drilled the hole out and installed a 3/8 bolt with a nylon lock nut. Start and test ran mower. Trans worked as designed.
Read less
Did you find this story helpful?
Thank you for voting!
Bolts that secure engine to the deck and hold the drive belt guide bracket in place, had worked loose. This allowed the bracket to drop into the path of the blade thus ruining the bracket.
1.Replaced the bracket with new one and secured it with replacement bolts.
2. Put old blade back on
3. Also replaced missing air cleaner and cover.
4. Quite an easy fix given the schematics to show what parts were missing.
Installed new taptite bolt in lawn mower. One of the three engine mount bolts in my mower fell out over time and the engine was shaking when it was running. Used thread locking compound to prevent loosening from engine vibration.
-Removed old engine from mower deck
-Installed new taptite screws 1/2 way into new engine mounting holes (holes are blind and
untapped, taptite screws are thread cutting type) then removed them
-Installed new engine on mower deck using new taptite screws fully driven in and torqued to OEM specifications
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1994)_WW_1.gif "Part Location Diagram of 95-1726 Toro Screw-taptite")
(1994)_WW_1.gif "Part Location Diagram of 95-1726 Toro Screw-taptite")
