Genuine OEM replacement part used on Walk Behind Mowers and Snowblowers. This is a Plastic Knob with a Metal Bushing inside. Does not ship with screw or washer these parts are sold separately. Replacing this part is very easy and it does not require any additional tools.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(20 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The snow blower wasn\'t throwing the snow as far as it use to and it was not getting all the snow down to the driveway surface. Also the engine ran rough because the choke lever broke.
To replace the blade scraper I removed the 2 bolts holding it in place and used a set of pliers to remove the tension springs. Reinstalled the new blade scraper without any problems. The 2 rubberized blades were held on by 6 bolts/nuts each. Those were fairly easy to remove and take the old rubber blade off and replace with the new one
... Read mores. The old ones still looked new but upon closer inspection they were wore down by 1/2\" - 3/4\". This made all the difference in throwing the snow. Then new blade scraper allowed the snow blower to get down to the surface of the driveway and not leave any snow on it. The only problem I noticed was the choke lever. The actual choke lever is attached with a screw that screw into a plastic piece which is formed into the choke butterfly itself. That being said, there was no need to by a new choke lever. This is a bad design by the manufacturer in my opinion. Now I either have to by that part and tear the carb apart to fix or if I can\'t get just that part, then I\'m sure I will have to buy the whole carb as a kit. Absolutely No Problems with ordering parts from Ereplacement parts at all. I had my parts in 2 days and everything I ordered was in the box properly labeled. Definitely will order parts from them again.
Followed the instructions on the manual for replacing the blade, took off the rope I was using for the knob handle and screw, put the plug discharge in the rear so I did not have to bag every time I mowed.
Did you find this story helpful?
Thank you for voting!
Drive belt Broken, Starter Rope broken, Missing handle bolt and nut, Missing discharge door latch and Tune Up
1. Inserted bolt into the handle and attached nut.
2. Replaced spark plug
3. Installed new discharge door latch
4. Removed old starter rope, installed new starter rope and rewound rope
5. Installed new pull handle on rope
6. Took mower blade off, removed drive belt shield, removed drive wheels, removed pulle
... Read morey guards and installed the new belt. (This was the most time-consuming part as it required a significant disassembly of the drive unit and lower drive unit to remove the drive belt shield and pulley guards.)
This mower is a 12-year-old Lawn Boy 10656 self-propelled mower. Other than basic maintenance I had never done anything to it. So, for about 2.5 hours of work and the cost of the parts it was a smart fix. It runs like a new mower and saved me at least $350. I was glad to be able to find these parts here at a decent price. I will definitely look here first in the future to find replacement parts.
Read less
Did you find this story helpful?
Thank you for voting!
handle screw vibrated out, lost it and the knob handle
Lawn Tractor
- Bucket Mount Kit, Z Master 3000, 5000, Or 6000 Series Riding Mower.
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2004)_WW_1.gif "Part Location Diagram of 106-4161 Toro Knob-handle")
(2004)_WW_1.gif "Part Location Diagram of 106-4161 Toro Knob-handle")
